Expression, Purification, Characterization and Bioinformatics Studies of a Novel Recombinant Alkaline Serine Protease
Applied food biotechnology · 02.06.2026
DOI: 10.22037/afb.v13i2.51875 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied food biotechnology, erschienen am 02.06.2026. Verfasst von Fatemeh Moradian und 3 weiteren Autor:innen.
Abstract (Originalsprache)
Background and Objective: Regarding the extensive industrial use of proteases, the discovery and detailed characterization of novel protease enzymes derived from native isolated microbial strains are scientifically and industrially important. Material and Methods: In this study, a novel recombinant alkaline serine protease was heterologously expressed in Escherichia coli BL21. Following the expression, the enzyme was purified and subjected to biochemical characterization and in silico analysis. Results and Conclusion: The purification process yielded an efficiency of 79.5% and the specific activity of the purified enzyme was assessed as 0.12 U mg-1. The enzyme showed significantly thermal stability, preserving approximately 50% of its activity after 3 h of incubation at temperatures ranging 60-70 °C. Furthermore, pH stability assays demonstrated that the enzyme was still functionally stable over a wide pH range, preserving 60-80% of its residual activity after 48 h, particularly under neutral to alkaline conditions. Exposure to sodium dodecyl sulfate, hydrogen peroxide and ethylenediaminetetraacetic acid included partial effects, with almost all enzyme activity was seen. However, the presence of β-mercaptoethanol, phenylmethyl sulphonyl fluoride and NaCl significantly decreased enzymatic activity, with decreases of approximately 50%. In silico analysis identified a conserved peptidase S8 and thermitase-like domain spanning amino acid residues of 40 to 270. Catalytically essential residues Asp76, His109 and Ser263 were predicted within the active site. Regarding its robust stability under increased temperatures and alkaline conditions with favorable catalytic characteristics, the recombinant serine protease promises its uses in various industrial processes, compared to the commercial counterpart enzymes. Keywords: Bioinformatics, Expression, Purification, Recombinant alkaline protease Introduction Proteases are one of the most important groups of industrial enzymes that are used in various industries [1,2]. Based on the Enzyme Commission classification (EC3.4.), proteases belong to Class 3 (hydrolases) and Subgroup 4 (hydrolyzing peptide bonds). The global market is expanding annually, accounting for approximately 60% of the total enzyme industry market [3]. Alkaline protease enzymes include several uses in fermentation, textile, leather, detergent, pharmaceutical, livestock and poultry food supplement production, lens and teeth cleaners, agriculture and food industry [1–3]. Alkaline serine proteases are the most important group of proteases used commercially [3]. Alkaline serine proteases include a molecular weight (MW) of 18–42 kDa and are active in a pH range of 6–11 at a temperature of 50–70 °C [3]. Proteases are used to produce cheese because proteases prevent the coagulation of milk by hydrolyzing casein [4]. In bakeries, proteases are used for faster dough preparation and gluten hydrolysis. The production of protein products with high nutritional value is carried out by adding microbial alkaline proteases. These protein products are vital in preparing baby foods and enriching soft drinks and fruit juices [1,5]. Researchers have reported that the use of protease in poultry feed increases the digestibility of food, improves the absorption of nutrients and digestibility of amino acids in the intestine, improves the digestibility of raw protein and amino acids, improves the growth performance of chickens and increases the food yield [6–8]. In the detergent and food industries, proteases are used, which include high thermal stability and their optimal activity is in alkaline conditions. Bacillus species are the major producers of extracellular proteases as microbial sources [1,2]. Since the production and extraction of commercial enzymes from wild-type microbial species include challenges, production of recombinant enzymes uses natural enzyme genes [9] and it seems necessary to identify these enzyme genes to expand the gene database for their recombinant production on an industrial scale. In addition to experimental studies, bioinformatics studies are useful for characterizing the novel enzyme and identifying its industrial use and production [4]. This study continued a previous study; in which, an alkaline serine protease was identified and its gene was cloned into an expression vector. Further investigations were carried out in this study to express and characterize the purified enzyme [9,10]. In 2018, Hadjidj et al. purified and biochemically and molecularly characterized a novel alkaline serine protease from Bacillus (B.) licheniformis K7A [11]. In 2018, Singh et al. isolated and characterized a serine protease enzyme from B. subtilis K-1 [12]. In 2013, Joshi et al. investigated the characteristics of an alkaline serine protease isolated from B. lehensis Strain MTCC7633 and identified its gene (BLAP), which was then expressed in Escherichia (E.) coli [13]. In 2012, Kaur et al. identified and isolated an alkaline protease gene from B. circulans MTCC 7906 and transferred and expressed the gene into E. coli DH5-α [14]. In 2010, Sadeghi et al. isolated an alkaline protease gene from B. subtilis, cloned it into the pTZ57R cloning vector and transferred it to E. coli Hb101 [15]. In 2021, Gurunathan et al. cloned a protease gene from a B. cereus strain from shallow marine hydrothermal vents located in the East China Sea and expressed the gene in the host E. coli BL21 [16]. In the present study, the expression parameters of the recombinant alkaline protease were optimized, followed by purification through affinity chromatography. Then, biochemical characteristics of the purified enzyme were characterized to assess its potential applicability in industrial processes. Based on experimental data and analyses carried out using ExPASy serverwith comparative modelling approaches, the three-dimensional (3-D) structure of the protein and amino acids of its active site were predicted. In this study, a novel recombinant alkaline protease was expressed and purified and its characteristics were described. The innovation of this study included its strong stability at high temperatures and alkaline conditions, as well as favorable catalytic characteristics, which are useful for use in various industrial processes and can be an appropriate alternative to its commercial types. Materials and Methods 2.1. Identifying and isolating the alkaline protease gene In a previous study, Bacillus sp. RAM53 was isolated by Amol Rice Research Institute and identified using biochemical and microbiological assays and molecular analysis [14]. Then, 1194 bp of the alkaline protease gene extracted from Bacillus sp. RAM53 was cloned in pET28a + [9] and used in this study for further studies. The gene analysis in Blastn showed 94% similarity with alkaline protease genes of Bacillus spp. Phylogenetic tree associated to the 16S rRNA sequence of Bacillus sp. RAM53 showed the proximity to B. cereus and B. thuringiensis [9]. 2.2. Expression of the recombinant enzyme and its purification First, a colony of recombinant bacteria was cultured overnight in 10 ml of Luria Bertani (LB) media containing kanamycin and then inoculated into 500 ml of fresh media [10]. When the bacterial growth at OD600 nm reached 0.4–0.6 in the bacterial culture media, isopropyl β-d-1-thiogalactopyranoside (IPTG) was added to a final concentration of 1 mM for induction; then, culture was incubated at 20 °C for 20 h. After lysis of the cell wall of bacteria using sonication, the cell extract was precipitated with 80% ammonium sulfate salt. This was centrifuged at 11,000× g for 20 min at 4 °C to separate the precipitate of proteins. After centrifugation, the protein precipitate was dissolved in 20 mM Tris buffer with pH 9. To remove excess salt from the proteins, this was dialyzed in buffer containing 10-mM imidazole using 15-kDa cut-off dialysis bag. To purify the recombinant enzyme due to the presence of a histidine sequence at the carboxyl end of the recombinant protein, cobalt sepharose-resin affinity chromatography (Arg Biotech, Iran) was used. Then, 4 ml of the protein sample were poured onto the column (1.5 × 10 cm) at a flow rate of 1 ml min-1. Imidazole concentration gradient was used to elute the protein samples from the chromatography column. The elution buffer consisted of two buffers of A and B; where, Buffer A contained 50 mM Tris, pH 7 and 1% Triton X-100; and Buffer B contained 150-mM imidazole and the concentration gradient was chosen 50–100% of Buffer B. After purification, the samples containing the recombinant enzyme were filtered to separate the additional proteins from the recombinant protein using 50-kDa cut-off filtration column. Then, 10% SDS-PAGE gel electrophoresis was used to verify the presence of recombinant protein in the samples. 2.3. Western Blot Analysis Proteins separated by SDS-PAGE were transferred onto a nitrocellulose membrane using transfer buffer containing 39-mM glycine, 48-mM Tris Base, 0.037% SDS and 20% methanol, and Bio-Rad Mini-Protean Tetra Cell System (BioRad, USA). Following the transfer, membranes were blocked with 5% BSA in PBS (pH 7.0) for 2 h at room temperature (RT) to prevent nonspecific binding. The membrane was then incubated with monoclonal anti-6xHis tag antibody (1:3000 dilution in PBS containing 1% Tween 20) for 2 h at RT with gentle agitation. After three washes with PBS/T, the membrane was incubated with horseradish peroxidase (HRP)-conjugated goat anti-mouse IgG secondary antibody (Sigma-Aldrich, USA), diluted 1:5000 in PBS/T containing BSA, at RT for 1 h with gentle shaking. Following another set of three PBS/T washes, protein detection was carried out using HRP chromogenic substrate. The enzymatic reaction was terminated by rinsing the membrane twice with distilled water (DW) [17]. 2.4. Enzyme activity assay For the standard assessment of total enzyme activity, 150 µl of the pure enzyme were mixed with 150 µ
Schlagwörter
Zitieren
APA
Moradian, F., Rezaie, O., Heidari, S. S., & Noorani, S. F. (2026). Expression, Purification, Characterization and Bioinformatics Studies of a Novel Recombinant Alkaline Serine Protease. Applied food biotechnology. https://doi.org/10.22037/afb.v13i2.51875
Vancouver
Moradian F, Rezaie O, Heidari SS, Noorani SF. Expression, Purification, Characterization and Bioinformatics Studies of a Novel Recombinant Alkaline Serine Protease. Applied food biotechnology. 2026. doi:10.22037/afb.v13i2.51875
BibTeX
@article{Moradian2026,
author = {Moradian, Fatemeh and Rezaie, Omid and Heidari, Shiva Shafieyan and Noorani, Seyedeh Fatemeh},
title = {Expression, Purification, Characterization and Bioinformatics Studies of a Novel Recombinant Alkaline Serine Protease},
journal = {Applied food biotechnology},
year = {2026},
doi = {10.22037/afb.v13i2.51875}
}
EUVIMED