EUVIMEDEUVIMED entdecken
Crossref

Design of Statistically-Based Bioprocesses for the Enhanced Production of Moderate Thermophilic Alkaline Α-Amylase from Bacillus Subtilis Isolated From Guilan Rice Mill Wastes

Reihane Chamani, Maryam Sadat Mirbagheri Firoozabad, Fariba Alkozei, Mehri Khatami

Applied food biotechnology · 20.10.2025

DOI: 10.22037/afb.v12i1.50183 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied food biotechnology, erschienen am 20.10.2025. Verfasst von Reihane Chamani und 3 weiteren Autor:innen.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background and Objective: The demand for cost-effective and thermostable α-amylases for industrial applications has driven the research to discover new microbial sources. This research aimed to isolate and characterize α-amylase-producing bacteria from rice milling wastes and employ Response Surface Methodology (RSM) to improve enzyme production. Material and Methods: Bacterial samples were collected from different agro-industrial wastes and primarily screened using Lugol's iodine method. Secondary isolation was performed by α-amylase activity assessment using the DNS assay. Enzyme production was optimized by RSM, with the temperature, pH, and starch concentration as key variables. In addition, the effect of different pH and temperatures was assessed on the α-amylase activity. 16S rRNA sequencing and phylogenetic analysis were used for bacterial identification. Results and Conclusion: The isolate was identified as Bacillus subtilis NllST B 627. Optimum conditions for maximum enzyme production (0.21 Umg-1) were starch 5.5 gL-1, temperature 40°C, and pH 7. Temperature was the most significant factor influencing enzyme production, whereas pH and starch concentration showed weaker effects but potentially relevant interactions. The overall model based on response surface curves was statistically significant, indicating that the combination of independent variables significantly influences enzyme production. The enzyme exhibited maximum activity at pH 7, while the lowest activity was observed at pH 5. Also, the enzyme's optimal activity occurred at 40°C, while the lowest catalysis was detected at 60°C. The identified strain exhibits promising properties for application in starch hydrolysis and other industrial purposes. This highlights the potential of rice mill wastes as a sustainable and low-cost resource for microbial enzyme production, and this study is the first to explore Guilan rice mill wastes for α-amylase production. Keywords: α-Αmylase production, Detergent industry, Enzyme optimization, Isolation and identification, RSM Method Introduction Producing enzymes on an industrial scale is an expensive effort. A potential approach to overcome this issue involves identifying enzyme-producing microorganisms from agricultural/industrial waste, a method that both lowers production costs and promotes waste beneficial reuse and environmental sustainability [1,2]. So, rice milling wastes are an abundant by-product found in areas where rice is cultivated and constitute a largely available material full of microbial diversity. The moist and starch-rich remnants produced during rice processing create a perfect environment for the growth of α-amylase-producing bacteria, which have potential uses in various industries [3]. α-Αmylases (EC 3.2.1.1) are extensively utilized in the food, fermentation, detergent, pharmaceutical industries, ethanol production [4], and as an antibiofilm agent [5]. These enzymes cleave α-1,4-glycosidic bonds in starch, facilitating the production of various products such as dextrose, glucose, and starch syrups [6]. Although many thermostable α-amylase-producing strains, such as Bacillus subtilis, Bacillus amyloliquefaciens, Bacillus stearothermo-philus, Bacillus licheniformis, Bacillus polymyxa, and Bacillus coagulans have been identified so far [7], discovering new strains from novel sources could result in enzymes operating in extreme conditions. This leads to increasing efficiency and reducing costs on an industrial scale [8]. Globally, α-amylases account for approximately 23-33% of the enzymatic market share [9]. However, the cost of industrial-scale enzyme production remains significantly high. It is estimated that microbial culture media formulation alone accounts for about 30-40% of the final enzyme production costs [10]. Consequently, there is a persistent need to reduce these costs by developing inexpensive culture media formulations, leading to significant efforts to identify cost-effective alternatives for industrial enzyme production. Various studies have been conducted on the identification and isolation of α-amylase-producing strains from different sources, including agricultural soils such as potato fields [11], industrial soils such as brick kiln [12], hot spring [13], deserts [14], different wastes [15,16], etc. For example, Niyomukiza et al. isolated amylolytic bacteria from starchy food wastes (maize meal and potato peel wastes), and 16S rRNA sequencing verified them as Bacillus subtilis. The optimum temperature for the enzyme was 60 °C, and the pH was 9 [17]. Tripathi et al. used Bacillus polymyxa NCIM 2539 to produce amylase using agro-industrial byproducts. Among various substrates tested, orange peel yielded the highest enzyme activity. Supplementation of the medium significantly enhanced amylase production, with optimal levels obtained at specific concentrations of orange peel, cysteine, and thiamine [18]. Many industries produce agricultural waste, one of which is the rice factory industry located in the North of Iran. They produce waste with high organic matter content, one of which is starch. The starch contained in the liquid waste can be broken down by bacteria-producing amylase enzymes into simpler molecules. In this research, there has been scarce focus on the microbial strains that exist within the starch-rich waste produced by rice mills, especially in Guilan province (Iran), where rice farming is a significant agricultural profession. This research aimed to isolate and molecularly characterize α-amylase-producing bacteria from rice milling waste and employ Response Surface Methodology (RSM) to improve enzyme production processes. Optimization of three parameters (incubation time, starch concentration, and incubation temperature) was investigated. Using an inexpensive, starch-rich waste substrate and statistical modeling to enhance enzyme output, this study could contribute to cost-effective enzyme development and play a significant role in sustainable industrial waste management. Materials and Methods 2.1. Primary isolation and screening of α-amylase-producing bacteria Bacterial samples were collected from rice mill wastes, chip manufacturing wastes, bakery dusts, textile wastewater, and other industrial waste, because these sources contain a significant percentage of starch and are likely to contain more degrading bacteria. For isolating spore-forming bacteria, particularly Bacillus species, serial dilutions were prepared. Heat shock treatment was applied for 10 minutes at 80°C in a water bath. Subsequently, bacteria were isolated using the streak plate method on Nutrient Agar medium [19]. The isolated bacteria were then tested for starch hydrolysis by inoculating them onto the starch agar plates containing 2% starch and incubating for 24 hours. After incubation, the ability to hydrolyze starch was assessed by flooding the plates with Lugol's iodine solution. Bacteria showing a clear zone around colonies, indicative of starch hydrolysis, were selected for further analysis. 2.2. Secondary screening by α-amylase activity assessment In the secondary screening phase, bacterial isolates that produced larger clear zones were selected for further enzymatic activity assessment. The α-amylase activity was measured in 250 mL flasks containing 50 mL of cultivation medium with the following composition (gL-1, Sigma-Aldrich, USA): starch 10%, peptone 5%, yeast extract 2.05%, NaCl 1.5 grL-1, KH₂PO₄ 0.5 gr/L, MgSO₄ 0.5 grL-1, CaCl₂ 0.1 grL-1, and glycerol 15% (vv-1). The flasks were incubated on a shaker at 120 rpm and 37°C for 48 hours. The initial pH of the medium was adjusted to 7.0. The inoculated bacterial strains were transferred into sterile pre-prepared medium. After incubation, samples were centrifuged at 10,000 rpm for 20 minutes, and the supernatant was collected for enzyme activity measurement. 2.3. Enzyme activity determination using the DNS method The dinitrosalicylic Acid (DNS) method was employed to quantify α-amylase activity [20]. DNS is an alkaline reagent that reacts with reducing sugars, causing a color change from yellow to reddish-brown. A reaction mixture comprising 0.5 mL of crude enzyme and 0.5 mL of 1% starch solution was prepared. The mixture was incubated at 37°C for 30 minutes. The reaction was stopped by adding 1 mL of DNS reagent, followed by boiling for 5 minutes. Glucose concentration was measured using a spectrophoto-meter at 540 nm. A glucose standard curve was generated by plotting absorbance at 540 nm against the amounts of glucose released to define the concentration of glucose formed in each solution. One unit of enzyme activity was defined as the amount of enzyme required to liberate 1 μmol of reducing sugars per minute. 2.4. Response surface methodology for production optimization The three strains exhibiting the highest production levels were selected from the screened bacterial isolates, and strain 2 was employed for statistical production optimization. RSM is a technique used to evaluate the influence of input parameters on responses [21]. Central Composite Design (CCD) provides an efficient approach to predict the interaction effects of influential factors on the process. In this study, optimization aimed to maximize enzyme production, using the Statistical Design-Expert 7.0 software, followed by CCD analysis [22]. In this design, the quantitative impact of the most effective variables, including starch concentration, temperature, and pH, were examined (Table 1). All experiments were conducted in triplicate. Positive and negative control strains were processed with every batch. 2.5. Evaluation of pH on the α-amylase activity The bacteria were cultivated in production media and incubated in a shaker incubator for 24 hours, followed by centrifugation. In separate tubes, 0.5 mL of the supernatant was mixed with 0.5 mL of sodium carbonate buffers at 50 mM with pH values of 9 and 10, trisodium citrate buffers at 50 mM with pH 5

Schlagwörter

alpha-amylaseBacillus subtilisrice mill wasteenzyme production optimizationresponse surface methodologystarch hydrolysisagro-industrial waste utilizationenzyme thermostabilitydetergent enzymes16S rRNA identification

Zitieren

APA

Chamani, R., Firoozabad, M. S. M., Alkozei, F., & Khatami, M. (2025). Design of Statistically-Based Bioprocesses for the Enhanced Production of Moderate Thermophilic Alkaline Α-Amylase from Bacillus Subtilis Isolated From Guilan Rice Mill Wastes. Applied food biotechnology. https://doi.org/10.22037/afb.v12i1.50183

Vancouver

Chamani R, Firoozabad MSM, Alkozei F, Khatami M. Design of Statistically-Based Bioprocesses for the Enhanced Production of Moderate Thermophilic Alkaline Α-Amylase from Bacillus Subtilis Isolated From Guilan Rice Mill Wastes. Applied food biotechnology. 2025. doi:10.22037/afb.v12i1.50183

BibTeX
@article{Chamani2025,
  author = {Chamani, Reihane and Firoozabad, Maryam Sadat Mirbagheri and Alkozei, Fariba and Khatami, Mehri},
  title = {Design of Statistically-Based Bioprocesses for the Enhanced Production of Moderate Thermophilic Alkaline Α-Amylase from Bacillus Subtilis Isolated From Guilan Rice Mill Wastes},
  journal = {Applied food biotechnology},
  year = {2025},
  doi = {10.22037/afb.v12i1.50183}
}
Kostenlos starten →