EUVIMEDEUVIMED entdecken
Crossref

O-carboxymethyl Chitosan-coated Bionanocomposite to Enhance Probiotic Viability under Gastrointestinal Digestion, Storage and Heat Treatment Conditions

Mohamadsadegh Mohamadzadeh, Ebrahim Vasheghani‐Farahani, Ahmad Fazeli, Seyed Abbas Shojaosadati

Applied food biotechnology · 07.05.2025

DOI: 10.22037/afb.v12i1.47575 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied food biotechnology, erschienen am 07.05.2025. Verfasst von Mohamadsadegh Mohamadzadeh und 3 weiteren Autor:innen.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background and Objective: Improving probiotics viability in digestive and storage conditions is challenging for the food and pharmaceutical industries. The present study aimed to increase viability of the microencapsulated probiotic strain of Lactobacillus reuteri ATCC 23272 in O-carboxymethyl chitosan-coated bionanocomposite. The O-carboxymethyl chitosan was used to coat bionanocomposite containing prebiotics of pectin and inulin in presence of magnesium oxide nanoparticles. Material and Methods: Pectin and inulin were used as prebiotics with magnesium oxide nanoparticles to improve the microgel structure and O-carboxymethyl chitosan for coating the microcapsules for increasing viability and stability of the probiotics. The extrusion efficiency, viability after microwave oven drying, survival in the simulated digestive fluids, viability after heat treatment and survival rate in long-term storage at 4 and 25 °C after 42 d were analyzed. Optimization of inulin, pectin and O-carboxymethyl chitosan in O-carboxymethyl chitosan-coated alginate-based bionanocomposite was achieved using Design-Expert software and simplex lattice mixture design. Results and Conclusion: Optimal formulation was achieved using O-carboxymethyl chitosan coating polymer (68% w/v), inulin (29.4% w/v) and pectin (2.6% w/v) with magnesium oxide nanoparticles at a constant concentration. Results showed microencapsulation efficiency (96.43%), survival after microwave oven drying (99.45%) and survival in simulated gastrointestinal conditions (88.95%). Probiotic viability entrapped in O-carboxymethyl chitosan-coated microcapsules decreased by 1.46 log CFU.g-1 at 80 °C for 5 min. Moreover, O-carboxymethyl chitosan-coated bionanocomposite improved the stability of probiotics by 2.93 and 3.25 log CFU.g-1 at 4 and 25 °C after 42 d, compared to alginate beads. Additionally, it was observed that O-carboxymethyl chitosan coating enhanced the stability of probiotics entrapped in bionanocomposite beads. Results demonstrated that O-carboxymethyl chitosan-coated bionanocomposite, as a novel microencapsulation, could significantly increase the shelf life and viability of Lactobacillus reuteri in various harsh conditions, compared to alginate beads. Conflict of interest: The authors declare no conflict of interest. Introduction Probiotics are beneficial live microorganisms that must be consumed sufficiently and survive the digestive tract for their effectiveness [1]. Due to the specific conditions of the mouth, stomach, small and large intestine, probiotics are susceptible to degradation. The multiple-covering technique enhances their stability and viability under these challenging conditions [2]. Therefore, coated microorganisms are expected to include higher viability than that non-coated microorganisms. One of the challenges is the efficacy of coating materials in improving viability and stability of bacteria under harsh conditions. Therefore, it is critical to choose an appropriate composition for the coating and microencapsulation of probiotics [3]. Alginate and chitosan are the most widely used natural polymers for the microencapsulation of probiotics. Prebiotics have recently been addressed to improve the viability of probiotics. Prebiotics may decolonize pathogens by modulating gut diversity; thereby, improving the growth of probiotics and decreasing the number of pathogens [4]. In addition to microencapsulating probiotics, coating bacteria as a layer on microencapsulating polymers can increase bacterial resistance to digestive and storage conditions. Simultaneous microencapsulation and coating of probiotics can include a positive effect on improving cell viability. Alginate, a carbohydrate polymer, is widely used in the food and pharmaceutical industries due to its non-toxicity, biodegradability, biocompatibility and ease of preparation. It can protect microorganisms from bile salts and stomach acid. However, alginate gels are susceptible to degradation in presence of monovalent ions, Ca²⁺ chelating agents, extreme pH levels and harsh chemical conditions, which can accelerate the release of encapsulated substances [5, 6]. Relatively, CMC is a water-soluble derivative of chitosan. In addition to cationic amine groups in chitosan, CMC contains further anionic carboxylic groups, which provide several potentials such as ampholytic characteristics. There are three categories of CMC based on the functional groups participating in the reaction such as O-CMC, N, O-CMC and N-CMC. The poor solubility of chitosan in water is one of the disadvantages of chitosan in drug delivery. The O-carboxymethyl chitosan (OCMC) effectively addresses the solubility issues associated with chitosan in aqueous solutions. Moreover, OCMC has attracted significant attentions due to its enhanced solubility, high viscosity, low toxicity and beneficial biocompatibility characteristics. Li et al. reported that ionic cross-linking through ionic interaction in alginate-CMC hydrogel could enhance the survival of Lactobacillus casei ATCC 393 against adverse conditions [7]. Inulin is a non-digestible fructan-type carbohydrate, soluble dietary fiber and includes short-chain fructooligo-saccharides (scFOS). It is widely addressed as a prebiotic because it can selectively be consumed by the gut microbiota, promoting growth of probiotic bacteria [8]. Zabihollahi et al. demonstrated that the survival of L. plantarum in carboxymethyl cellulose-based film increased significantly (36%) with the addition of inulin as a prebiotic during storage [9]. The pectin structure includes a linear chain of α-(1, 4)-linked D-galacturonic acid units, commonly identified as the homogalacturonan domain or the smooth region. As a prebiotic, pectin plays a critical role in modulating composition and metabolism of intestinal microbiota and decreasing possibility of intestinal colitis [10]. The pectin-inulin composite has enhanced the survival rate of L. casei and L. rhamnosus, compared to free cells in a simulated gastrointestinal tract (GIT) [11]. Magnesium oxide nanoparticles (MgONPs) have recently been highlighted as a potential candidate for controlled drug delivery systems due to their biocompatibility, non-toxicity, biodegradability, stability and various biomedical characteristics such as anticancer, antioxidant and antidiabetic characteristics. Using MgONPs in alginate-gelatin microgel showed significant advantages in enhancing viability of Pediococcus pentosaceus Li05 in heat treatment, simulated digestive fluid and long-term storage [12]. Researchers have implemented various strategies to increase bacterial viability, including use of prebiotics, nanoparticles and microcapsule coating separately. For example, use of MgONPs in the microencapsulation of bacteria has been studied to improve viability of probiotics in the digestive system. Research has shown that using prebiotics improves probiotics viability during the microencapsulation process and various polymers to improve the stability of probiotics. To improve probiotic viability under various harsh conditions, the present study simultaneously used prebiotics, MgONPs and OCMC as microcapsule coatings. The simultaneous use of prebiotics, MgONPs and OCMC in the microencapsulation of probiotics can improve the viability of probiotics under various harsh conditions by creating a synergistic effect. To the best of the authors’ knowledge, no studies are available that investigate bacterial viability by coating microcapsules containing MgONPs and prebiotics. The experimental design used a simplex lattice mixture method to assess the optimal percentage of OCMC, inulin and pectin. The quantities of MgONPs and sodium alginate (SA) were constant in all experiments. Drying was carried out using microwave oven. Encapsulation efficiency, survival in simulated digestive fluids, heat treatment of microencapsulated probiotics and stability in storage conditions were calculated as well. Materials and Methods 2.1 Materials The probiotic strain of L. reuteri ATCC 23272 was provided by the Iranian Scientific and Industrial Research Organization, Tehran, Iran. The OCMC (purity greater than 98%, deacetylation degree of 80%, carboxyl substitution degree of greater than 80% and amino content of nearly 1.45%) was purchased from Macklin, Shanghai, China. The MgONPs (purity greater than 99% and APS of 20 nm) were purchased from US Research Nanomaterials, Houston, TX, USA. Inulin (molecular weight of nearly 5000 Da with food-grade), low methoxyl pectin of citrus source (molecular weight of 70–140 kDa, degree of esterification of 27%) and SA (viscosity of 2000 cp, molecular weight of 80–120 kDa and M/G ratio of 1.56) were purchased from BSK Pharmaceutical, Tehran, Iran. Pancreatin from porcine pancreas (6000 FIP-U.g-1 lipase, 350 FIP-U.g-1 protease and 7500 FIP-U.g-1 amylase), pepsin from porcine gastric mucosa (P700, 250 U.mg-1), lactic acid, sodium citrate, glucose, calcium chloride, bile salts, trypticase soy broth (TSB) and trypticase soy agar (TSA), deMan Rogosa Sharpe (MRS) agar and broth (Cat no. 110660) were purchased from Sigma Aldrich, St. Louis, USA. 2.2 Probiotic Culture Preparation The L. reuteri ATCC 23272 was incubated in MRS broth at 37 °C for 24 h. The probiotics were harvested by centrifuging at 1790 g for 10 min at 4 °C. Probiotic cells were washed twice with sterile PBS (PBS) (pH 7.4). To ensure the elimination of the supernatant from the culture broth, bacteria were recentrifuged under similar conditions and then resuspended in 2 ml of PBS [13, 14]. 2.3 Preparation of Polysaccharides-based Bionanocom-posite Various compositions have been prepared for inulin and pectin prebiotics. The ratio of inulin:pectin of 10.9:1 was chosen as the optimal concentration, which was achieved in a previous study [15]. Based on the concentrations presented in Table 1, prebiotics were suspended in deionized water with a certain concentration (Table 1), MgONPs at a concentrati

Schlagwörter

O-carboxymethyl chitosanprobiotic viabilityLactobacillus reuterimicroencapsulationbionanocompositesmagnesium oxide nanoparticlespectininulinprebioticsalginate microcapsules

Zitieren

APA

Mohamadzadeh, M., Vasheghani‐Farahani, E., Fazeli, A., & Shojaosadati, S. A. (2025). O-carboxymethyl Chitosan-coated Bionanocomposite to Enhance Probiotic Viability under Gastrointestinal Digestion, Storage and Heat Treatment Conditions. Applied food biotechnology. https://doi.org/10.22037/afb.v12i1.47575

Vancouver

Mohamadzadeh M, Vasheghani‐Farahani E, Fazeli A, Shojaosadati SA. O-carboxymethyl Chitosan-coated Bionanocomposite to Enhance Probiotic Viability under Gastrointestinal Digestion, Storage and Heat Treatment Conditions. Applied food biotechnology. 2025. doi:10.22037/afb.v12i1.47575

BibTeX
@article{Mohamadzadeh2025,
  author = {Mohamadzadeh, Mohamadsadegh and Vasheghani‐Farahani, Ebrahim and Fazeli, Ahmad and Shojaosadati, Seyed Abbas},
  title = {O-carboxymethyl Chitosan-coated Bionanocomposite to Enhance Probiotic Viability under Gastrointestinal Digestion, Storage and Heat Treatment Conditions},
  journal = {Applied food biotechnology},
  year = {2025},
  doi = {10.22037/afb.v12i1.47575}
}
Kostenlos starten →