EUVIMEDEUVIMED entdecken
Crossref

Evaluation of factors affecting bead formation on electrospun PU/PEG nanofibers

Pouyan Shakouri, Fatemeh Oroojalian, Amir Amani

Nanomedicine Research Journal · 2025-09 · 10 (3) · 316-323

DOI: 10.22034/nmrj.2025.03.010 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanomedicine Research Journal, 2025-09. Verfasst von Pouyan Shakouri und 2 weiteren Autor:innen.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The formation of beads on electrospun nanofibers is commonly considered as a defect; therefore, researchers typically aim to produce bead-free nanofibers. Although several studies have investigated the parameters influencing bead formation, most have employed a one-factor-at-a-time approach, which is not ideal for capturing interaction effects among variables. In the present study, a Box–Behnken design was used to investigate the effects of solution concentration, applied voltage, and feed rate on bead formation. A total of 17 samples were prepared according to the design generated by the software, and bead formation on the samples was analyzed using scanning electron microscopy (SEM). The resulting data were subsequently used to develop a predictive model. The findings indicated that feed rate and applied voltage are the dominant factors, each exhibiting an optimal range required for the fabrication of bead-free fibers. In conclusion, bead-free nanofibers can be obtained through appropriate optimization of the applied voltage and feed rate.

Schlagwörter

electrospinningbeadconcentrationapplied voltagefeed rate

Zitieren

APA

Shakouri, P., Oroojalian, F., & Amani, A. (2025). Evaluation of factors affecting bead formation on electrospun PU/PEG nanofibers. Nanomedicine Research Journal, 10(3), 316-323. https://doi.org/10.22034/nmrj.2025.03.010

Vancouver

Shakouri P, Oroojalian F, Amani A. Evaluation of factors affecting bead formation on electrospun PU/PEG nanofibers. Nanomedicine Research Journal. 2025;10(3):316-323. doi:10.22034/nmrj.2025.03.010

BibTeX
@article{Shakouri2025,
  author = {Shakouri, Pouyan and Oroojalian, Fatemeh and Amani, Amir},
  title = {Evaluation of factors affecting bead formation on electrospun PU/PEG nanofibers},
  journal = {Nanomedicine Research Journal},
  year = {2025},
  volume = {10},
  number = {3},
  pages = {316--323},
  doi = {10.22034/nmrj.2025.03.010}
}
Kostenlos starten →