EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Kinetic Modelling, Faraday-Based Continuous-Flow Projection, and Techno-Economic Assessment of Electrocoagulation-Filtration for Batik Wastewater

Erina Rahmadyanti, Danayanti Azmi Dewi Nusantara, Ronny Durrotun Nasihien, Dimas Nur Prakoso, Sugeng Rifqi Mubaroq

Advances in Environmental and Engineering Research · 21.07.2026 · 07 (03) · 1-28

DOI: 10.21926/aeer.2603022 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Environmental and Engineering Research, online erschienen am 21.07.2026. Verfasst von Erina Rahmadyanti und 4 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wastewater from stamped batik (batik cap) — the block-printing method that dominates micro, small, and medium enterprise (MSME) production across Southeast Asia — is commonly discharged without a transferable design basis for continuous-flow scale. This study links batch-scale electrocoagulation-filtration (EC-F) kinetics to operational current-density projections for a 1 m3/day wastewater treatment plant, complemented by techno-economic and carbon footprint assessments. A 2 × 3 factorial batch experiment with aluminium electrodes was conducted on real batik cap effluent. Six candidate kinetic forms — exponential saturation, pseudo-first-order, pseudo-second-order, Langmuir-hyperbolic, Gompertz, and logistic — were compared via AIC; sigmoidal forms (Gompertz at 4 cm gap; logistic at 2 cm gap) provided substantially better description of the η versus Faraday aluminium-dose data than the exponential baseline (ΔAIC = 5–38). The spacing factor was retained after controlling for total charge as a covariate (ANCOVA p < 10-4 for all three parameters), confirming a genuine geometric-mass-transfer effect beyond the coulombic load. The laboratory optimum yielded chemical oxygen demand, biochemical oxygen demand, and total suspended solids removals above 92% at a specific energy demand of 4.5-10.5 kWh kg-1 pollutant. The continuous-flow projection — explicitly framed as a predictive scale-up framework rather than a validated solution — recommends an operational current density of ≈1.4 mA cm-2 (parameter-wise medians 1.28-1.36 mA cm-2; combined safety value 1.4), one order of magnitude below the batch range, with projected effluent compliant with national discharge standards. Operational cost of USD 1.05-1.75 m-3 (correlated Monte Carlo, n = 20,000) is most sensitive to the kinetic rate constant and the aluminium plate price; the carbon footprint is dominated by primary aluminium production (89% of 10.4 kg CO2 m-3) and can be reduced to 0.99 kg CO2 m-3 by combining recycled-aluminium electrodes with photovoltaic power. A trade-off analysis between removal efficiency and sludge generation is also reported. The framework provides an auditable, MSME-relevant design basis for EC scale-up in the Southeast Asian batik sector.

Zitieren

APA

Rahmadyanti, E., Nusantara, D. A. D., Nasihien, R. D., Prakoso, D. N., & Mubaroq, S. R. (2026). Kinetic Modelling, Faraday-Based Continuous-Flow Projection, and Techno-Economic Assessment of Electrocoagulation-Filtration for Batik Wastewater. Advances in Environmental and Engineering Research, 07(03), 1-28. https://doi.org/10.21926/aeer.2603022

Vancouver

Rahmadyanti E, Nusantara DAD, Nasihien RD, Prakoso DN, Mubaroq SR. Kinetic Modelling, Faraday-Based Continuous-Flow Projection, and Techno-Economic Assessment of Electrocoagulation-Filtration for Batik Wastewater. Advances in Environmental and Engineering Research. 2026;07(03):1-28. doi:10.21926/aeer.2603022

BibTeX
@article{Rahmadyanti2026,
  author = {Rahmadyanti, Erina and Nusantara, Danayanti Azmi Dewi and Nasihien, Ronny Durrotun and Prakoso, Dimas Nur and Mubaroq, Sugeng Rifqi},
  title = {Kinetic Modelling, Faraday-Based Continuous-Flow Projection, and Techno-Economic Assessment of Electrocoagulation-Filtration for Batik Wastewater},
  journal = {Advances in Environmental and Engineering Research},
  year = {2026},
  volume = {07},
  number = {03},
  pages = {1--28},
  doi = {10.21926/aeer.2603022}
}
Kostenlos starten →