EUVIMEDEUVIMED entdecken
Crossref

ADDITIVELY MANUFACTURED REFLECTOR-BACKED SUB-6 GHZ BOW-TIE ANTENNA

Burak Dökmetaş

Mühendislik Bilimleri ve Tasarım Dergisi · 20.03.2026 · 14 (1) · 191-202

DOI: 10.21923/jesd.1880712 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Mühendislik Bilimleri ve Tasarım Dergisi, online erschienen am 20.03.2026. Verfasst von Burak Dökmetaş. Die Arbeit nennt 18 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a gain enhanced bow-tie antenna operating in the lower portion of the sub-6 GHz frequency spectrum, which is of interest for broadband wireless and sensing applications. The proposed antenna is based on a crossed geometry formed by nested equilateral triangular elements symmetrically arranged on both sides of a dielectric substrate, enabling multiple effective current paths and wide impedance bandwidth without the need for complex matching networks. The antenna is fabricated using fused deposition modeling (FDM) technology with PREPERM ABS800 filament. To enhance the realized gain, a dielectric-backed reflector incorporating a conductive layer is integrated beneath the radiating structure and mechanically supported by four dielectric posts. Experimental measurements show that the proposed antenna covers a measured bandwidth from 1.2 GHz to 3.1 GHz, resulting in an absolute bandwidth of 1.9 GHz. The results further indicate that the inclusion of the reflector provides a clear realized gain enhancement across the operating band, increasing the gain from approximately 2.6–3.7 dBi to about 4.5–5.7 dBi. These results confirm that the proposed design offers a fabrication friendly, and broadband antenna solution with consistent gain enhancement, making it suitable for lower sub-6 GHz wireless and sensing systems.

Zitieren

APA

Dökmetaş, B. (2026). ADDITIVELY MANUFACTURED REFLECTOR-BACKED SUB-6 GHZ BOW-TIE ANTENNA. Mühendislik Bilimleri ve Tasarım Dergisi, 14(1), 191-202. https://doi.org/10.21923/jesd.1880712

Vancouver

Dökmetaş B. ADDITIVELY MANUFACTURED REFLECTOR-BACKED SUB-6 GHZ BOW-TIE ANTENNA. Mühendislik Bilimleri ve Tasarım Dergisi. 2026;14(1):191-202. doi:10.21923/jesd.1880712

BibTeX
@article{Dkmeta2026,
  author = {Dökmetaş, Burak},
  title = {ADDITIVELY MANUFACTURED REFLECTOR-BACKED SUB-6 GHZ BOW-TIE ANTENNA},
  journal = {Mühendislik Bilimleri ve Tasarım Dergisi},
  year = {2026},
  volume = {14},
  number = {1},
  pages = {191--202},
  doi = {10.21923/jesd.1880712}
}
Kostenlos starten →