EUVIMEDEUVIMED entdecken
Crossref

Fracture toughness evaluation of zirconia ceramics using nonlinear dynamic finite element analysis

Okkar Kyaw, Satoshi Yamaguchi, Manabu Kanazawa, Jan De Munck, Pong Pongprueksa, Jef Vleugels, Bart Van Meerbeek, Fei Zhang, Masanao Inokoshi

Journal of Prosthodontic Research · 2026

DOI: 10.2186/jpr.jpr_d_25_00242 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontic Research, 2026. Verfasst von Okkar Kyaw und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Gerodontology and Oral Rehabilitation, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, Tokyo, Japan. Hauptthemen laut MEDLINE: Zirconium, Finite Element Analysis, Yttrium, Ceramics. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 63 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PURPOSE: The purpose of this study was to establish chevron-notched beam (CNB) finite element analysis (FEA) models to investigate the fracture toughness of zirconia ceramics. METHODS: Experimental four-point flexural strength data (n = 9; previously published) for 3 mol% yttria-stabilized tetragonal zirconia polycrystals (3Y-TZP; 3M Oral Care, Seefeld, Germany) were combined with numerical data (calculated using the inverse finite element method) to evaluate the input material properties of the CNB-FEA models. These models (n = 8) were then simulated and validated against the CNB test data of specimens with the same geometries (n = 8). The validation criteria included the margin of error, coefficient of determination, and linear regression. FEA was used to evaluate the volumetric strain distribution during deformation. RESULTS: 3Y-TZP has static elastic modulus and fracture strain values of 144.5 GPa and 0.0056, respectively. The fracture toughness of the CNB-FEA models closely matched those of the corresponding test specimens (±3% error). Linear regression yielded a coefficient of determination (R2) of 0.94 (P < 0.05), demonstrating an excellent predictive performance. The CNB-FEA models accurately reflected the actual fracture behaviors of the zirconia ceramics, with the volumetric strain localized at the notch tip. CONCLUSIONS: The volumetric strains of the CNB-FEA models could be determined using the FEA and measured four-point flexural strength data. Thus, CNB-FEA was found to be a valuable method for predicting the fracture toughness of zirconia ceramics.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ZirconiumFinite Element AnalysisYttriumCeramicsFlexural StrengthNonlinear DynamicsMaterials TestingDental Stress AnalysisDental MaterialsElastic ModulusStress, Mechanical

Stichwörter der Autor:innen

3Y-TZPCAD-CAMChevron-notched beamFEAInverse finite element method

Substanzen

ZirconiumYttriumyttria stabilized tetragonal zirconiazirconium oxideDental Materials

Autor:innen und Institutionen

  • Department of Gerodontology and Oral Rehabilitation, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, Tokyo, Japan.
  • Department of Dental Biomaterials, Graduate School of Dentistry, The University of Osaka, Yamadaoka, Suita, Japan.
  • Clinic of General, Special Care and Geriatric Dentistry, Center for Dental Medicine, University of Zurich, Zurich, Switzerland.
  • KU Leuven (University of Leuven), Department of Oral Health Sciences, BIOMAT & UZ Leuven (University Hospitals Leuven), Dentistry, Leuven, Belgium.
  • Department of Operative Dentistry and Endodontics, Faculty of Dentistry, Mahidol University, Bangkok, Thailand.
  • KU Leuven (University of Leuven), Department of Materials Engineering, Leuven, Belgium.

Zitieren

APA

Okkar Kyaw, Yamaguchi, S., Kanazawa, M., De Munck, J., Pongprueksa, P., Vleugels, J., Van Meerbeek, B., Zhang, F., & Inokoshi, M. (2026). Fracture toughness evaluation of zirconia ceramics using nonlinear dynamic finite element analysis. Journal of Prosthodontic Research. https://doi.org/10.2186/jpr.jpr_d_25_00242

Vancouver

Okkar Kyaw, Yamaguchi S, Kanazawa M, De Munck J, Pongprueksa P, Vleugels J, et al. Fracture toughness evaluation of zirconia ceramics using nonlinear dynamic finite element analysis. Journal of Prosthodontic Research. 2026. doi:10.2186/jpr.jpr_d_25_00242

BibTeX
@article{OkkarKyaw2026,
  author = {Okkar Kyaw and Yamaguchi, Satoshi and Kanazawa, Manabu and De Munck, Jan and Pongprueksa, Pong and Vleugels, Jef and Van Meerbeek, Bart and Zhang, Fei and Inokoshi, Masanao},
  title = {Fracture toughness evaluation of zirconia ceramics using nonlinear dynamic finite element analysis},
  journal = {Journal of Prosthodontic Research},
  year = {2026},
  doi = {10.2186/jpr.jpr_d_25_00242}
}
Kostenlos starten →