Characterization, antimicrobial activity, biocompatibility, and inflammatory response of 3D-printed denture base resin functionalized with alpha-silver tungstate
Journal of Prosthodontic Research · 2026 · 70 (4) · 619-632
DOI: 10.2186/jpr.jpr_d_25_00118 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Prosthodontic Research, 2026. Verfasst von Vinícius Henrique Ferreira Pereira de Oliveira und 11 weiteren Autor:innen. Beteiligte Einrichtung: São Paulo State University (UNESP), School of Dentistry, Araraquara, Brazil. Hauptthemen laut MEDLINE: Tungsten Compounds, Anti-Infective Agents, Denture Bases, Biocompatible Materials. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 96 Literaturangaben.
Abstract (Originalsprache)
PURPOSE: We functionalized a three-dimensionally (3D) printed denture base resin with α-Ag2WO4 microcrystals and evaluated its chemical and surface properties, flexural strength, antimicrobial activity, biocompatibility, and inflammatory response. METHODS: Resin specimens were characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The surface roughness was evaluated by profilometry and wettability, whereas the surface free energy was determined using a goniometer. The flexural strength of the resin was assessed by three-point mechanical flexural testing. Antimicrobial activity was evaluated against Candida albicans, Staphylococcus aureus, and Escherichia coli in the adhesion and biofilm formation phases by counting colony-forming units (CFU)/mL and using confocal laser scanning microscopy (CLSM). Time-kill curve assays were performed using the Alamar Blue (AB) reagent, and the biocompatibility of the materials was evaluated in a 3D organotypic model of the oral mucosa using AB and CLSM. Inflammatory response was assessed by measuring cytokine production using flow cytometry. RESULTS: XRD, FTIR, and SEM analyses demonstrated that α-Ag2WO4 was incorporated into the resin with its structure preserved. The surface roughness did not change, and the surface free energy increased; however, the flexural strength decreased slightly. The evaluated resins exhibited antifungal and antibacterial effects at both the adhesion and biofilm formation stages. Functionalization did not alter the biocompatibility of the resins and did not cause an exacerbated inflammatory response. CONCLUSIONS: Functionalization of a 3D-printed denture base resin with α-Ag2WO4 demonstrated antimicrobial activity without any detrimental effects to the surface, mechanical, and biocompatibility properties of the material.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- São Paulo State University (UNESP), School of Dentistry, Araraquara, Brazil.
- Department of Biosciences, Federal University of São Paulo (UNIFESP), Santos, Brazil.
- São Paulo State University (UNESP), School of Pharmaceutical Sciences, Araraquara, Brazil.
- CDMF, Federal University of São Carlos (UFSCar), São Carlos, Brazil.
- São Paulo State University (UNESP), Institute of Chemistry, Araraquara, Brazil.
Zitieren
APA
de Oliveira, V. H. F. P., de Annunzio, S. R., Assis, M., Barbugli, P. A., de Lima Moraes, B., de Oliveira, J. S., de Camargo Doimo, A. L., Piazza, R. D., Costa Marques, R. F., Jorge, J. H., Longo, E., & Vergani, C. E. (2026). Characterization, antimicrobial activity, biocompatibility, and inflammatory response of 3D-printed denture base resin functionalized with alpha-silver tungstate. Journal of Prosthodontic Research, 70(4), 619-632. https://doi.org/10.2186/jpr.jpr_d_25_00118
Vancouver
de Oliveira VHFP, de Annunzio SR, Assis M, Barbugli PA, de Lima Moraes B, de Oliveira JS, et al. Characterization, antimicrobial activity, biocompatibility, and inflammatory response of 3D-printed denture base resin functionalized with alpha-silver tungstate. Journal of Prosthodontic Research. 2026;70(4):619-632. doi:10.2186/jpr.jpr_d_25_00118
BibTeX
@article{deOliveira2026,
author = {de Oliveira, Vinícius Henrique Ferreira Pereira and de Annunzio, Sarah Raquel and Assis, Marcelo and Barbugli, Paula Aboud and de Lima Moraes, Bruna and de Oliveira, Jonatas Silva and de Camargo Doimo, Ana Luiza and Piazza, Rodolfo Debone and Costa Marques, Rodrigo Fernando and Jorge, Janaína Habib and Longo, Elson and Vergani, Carlos Eduardo},
title = {Characterization, antimicrobial activity, biocompatibility, and inflammatory response of 3D-printed denture base resin functionalized with alpha-silver tungstate},
journal = {Journal of Prosthodontic Research},
year = {2026},
volume = {70},
number = {4},
pages = {619--632},
doi = {10.2186/jpr.jpr_d_25_00118}
}
EUVIMED