Influence of ceramic thickness and cementation strategy on long-term fracture load of glass-ceramics bonded to dentin
Journal of Prosthodontic Research · 2026
DOI: 10.2186/jpr.jpr_d_24_00262 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Prosthodontic Research, 2026. Verfasst von Nanthiphorn Wongwiwat und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Operative Dentistry and Endodontics, Faculty of Dentistry, Mahidol University, Bangkok, Thailand. Hauptthemen laut MEDLINE: Ceramics, Dentin, Cementation, Dental Porcelain. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 47 Literaturangaben.
Abstract (Originalsprache)
PURPOSE: This study aimed to investigate the effect of light-curing on the fracture load of glass-ceramic discs bonded to dentin. METHODS: IPS e.max CAD (lithium disilicate) and Celtra Duo (zirconia-reinforced lithium silicate) glass-ceramic discs, each 7 mm in diameter, were bonded to flattened dentin using three different cementation strategies. The discs varied in thickness, measuring 0.8 mm and 1.5 mm. The three strategies implemented were as follows: (1) SBU/ULT(AL): auto-cured adhesive and light-cured resin cement, (2) SBU/ULT(LL): light-cured adhesive and light-cured resin cement, and (3) resin composite, which served as the positive control. The fracture loads of eight specimens from each group were evaluated after storing the samples for one week and one year. Data were analyzed using linear mixed-effects models with a significance level of 0.05. RESULTS: The thickness of the ceramic material and the cementation strategy significantly influenced the fracture load (P 0.05). CONCLUSIONS: Light-curing the adhesive separately from the resin cement (SBU/ULT(LL)) and employing composite cement are recommended strategies for cementing glass ceramics with dentin to enhance fracture load resistance.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Operative Dentistry and Endodontics, Faculty of Dentistry, Mahidol University, Bangkok, Thailand.
- Department of Prosthodontics, Faculty of Dentistry, Mahidol University, Bangkok, Thailand.
- Department of Oral Devices and Materials, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo, Tokyo, Japan.
Zitieren
APA
Wongwiwat, N., Suputtamongkol, K., Inokoshi, M., & Pongprueksa, P. (2026). Influence of ceramic thickness and cementation strategy on long-term fracture load of glass-ceramics bonded to dentin. Journal of Prosthodontic Research. https://doi.org/10.2186/jpr.jpr_d_24_00262
Vancouver
Wongwiwat N, Suputtamongkol K, Inokoshi M, Pongprueksa P. Influence of ceramic thickness and cementation strategy on long-term fracture load of glass-ceramics bonded to dentin. Journal of Prosthodontic Research. 2026. doi:10.2186/jpr.jpr_d_24_00262
BibTeX
@article{Wongwiwat2026,
author = {Wongwiwat, Nanthiphorn and Suputtamongkol, Kallaya and Inokoshi, Masanao and Pongprueksa, Pong},
title = {Influence of ceramic thickness and cementation strategy on long-term fracture load of glass-ceramics bonded to dentin},
journal = {Journal of Prosthodontic Research},
year = {2026},
doi = {10.2186/jpr.jpr_d_24_00262}
}
EUVIMED