EUVIMEDEUVIMED entdecken
Crossref

Cantilever resin-bonded fixed dental prosthesis to substitute a single premolar: Impact of retainer design and ceramic material after dynamic loading

Ammar T Kasem, Manal Abo-Madina, João Paulo M Tribst, Walid Al-Zordk

Journal of Prosthodontic Research · 2023

DOI: 10.2186/jpr.jpr_d_22_00226 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontic Research, 2023. Verfasst von Ammar T Kasem und 3 weiteren Autor:innen. Beteiligte Einrichtung: Fixed Prosthodontics Department, Faculty of Dentistry, Mansoura University, Mansoura, Egypt. Hauptthemen laut MEDLINE: Ceramics, Bicuspid, Denture, Partial, Fixed, Resin-Bonded, Dental Porcelain. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 47 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PURPOSE: To evaluate the influence of retainer design and ceramic materials on the durability of minimally invasive cantilever resin-bonded fixed dental prostheses (RBFDPs) after artificial aging. METHODS: One hundred caries-free human mandibular molars were prepared as abutments for all-ceramic cantilevered fixed dental prostheses using the following retainer designs: One wing (OW), Two wings (TW), Inlay ring (IR), Lingual coverage (LC), and Occlusal coverage (OC). Two ceramic materials were used: monolithic high translucent zirconia(z) and zirconia-reinforced lithium disilicate (ZLS2) (n=10). All restorations were adhesively bonded with resin cement. The thermocycling of the specimens were performed between 5°C and 55°C for 10,000 cycles and then exposed to 240.000 cycles of dynamic loading on a chewing simulator. All surviving specimens were loaded onto the pontic until failure using a universal testing machine. RESULTS: The mean failure load ranged from 124.00 to 627.00 N for the zirconia groups and from 133.30 to 230.00 N for the ZLS2 groups. Regarding the materials, a significantly higher failure load was recorded in the zirconia groups than in the ZLS2 groups (P

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CeramicsBicuspidDenture, Partial, Fixed, Resin-BondedDental PorcelainDental BondingDental MaterialsHumansZirconiumDental Stress AnalysisMaterials TestingResin Cements

Stichwörter der Autor:innen

CantileverFracture resistanceMinimally invasiveResin bondedZirconia-reinforced lithium disilicate

Substanzen

Zirconiumzirconium oxideDental PorcelainResin CementsDental Materials

Autor:innen und Institutionen

  • Fixed Prosthodontics Department, Faculty of Dentistry, Mansoura University, Mansoura, Egypt.
  • Fixed Prosthodontics Department, Faculty of Dentistry, Delta University for Science and Technology, Mansoura, Egypt.
  • Department of Oral Regenerative Medicine, Academic Centre for Dentistry Amsterdam (ACTA), Universiteit van Amsterdam and Vrije Universiteit, Amsterdam, the Netherlands.

Zitieren

APA

Kasem, A. T., Abo-Madina, M., Tribst, J. P. M., & Al-Zordk, W. (2023). Cantilever resin-bonded fixed dental prosthesis to substitute a single premolar: Impact of retainer design and ceramic material after dynamic loading. Journal of Prosthodontic Research. https://doi.org/10.2186/jpr.jpr_d_22_00226

Vancouver

Kasem AT, Abo-Madina M, Tribst JPM, Al-Zordk W. Cantilever resin-bonded fixed dental prosthesis to substitute a single premolar: Impact of retainer design and ceramic material after dynamic loading. Journal of Prosthodontic Research. 2023. doi:10.2186/jpr.jpr_d_22_00226

BibTeX
@article{Kasem2023,
  author = {Kasem, Ammar T and Abo-Madina, Manal and Tribst, João Paulo M and Al-Zordk, Walid},
  title = {Cantilever resin-bonded fixed dental prosthesis to substitute a single premolar: Impact of retainer design and ceramic material after dynamic loading},
  journal = {Journal of Prosthodontic Research},
  year = {2023},
  doi = {10.2186/jpr.jpr_d_22_00226}
}
Kostenlos starten →