EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Experimental Evaluation of a Light Cut-off (Baffle) Plate for Aftermarket LED Motorcycle Headlamps

Dwi Prasetyo, Elky Fakhriza, Beni Setya Nugraha

Journal of Automotive and Mechanical Applied Technology · 2025

DOI: 10.21831/jamat.v2i2.2462 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Automotive and Mechanical Applied Technology, 2025. Verfasst von Dwi Prasetyo und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to determine the impact of replacing halogen lights with LED lights on two-wheeled vehicles, focusing on energy efficiency, light brightness levels, and operational temperatures of the lights to support road safety in areas with minimal road lighting, as well as on adjusting the light distribution of the applied LED lights. The method used was an experiment conducted on variables for which data were unavailable, necessitating manipulation of the research object. The experiment was conducted using a Honda Supra 125 FI motorcycle, with measurements of light intensity (lux), power consumption (watts), battery current (V), electric current (A), and operating temperature (°C). The known impact became a reference for regulating LED light distribution. The test shows that applying a barrier plate design to LED lights can provide focused lighting through its light distribution patterns. The application of the baffle plate design to LED lights provided focused lighting through its light distribution patterns. The use of LED lights provided a slightly higher intensity (6.4%) and an energy consumption efficiency 60% higher, with a reduction in operating temperature of 64%. The application results show that the light control plate successfully forms a bright-dark cut-off, with a uniform light distribution and consistent light intensity of 1854 lux. This indicates that the tested LED lamp maintains stable lighting performance without a decrease in brightness.

Zitieren

APA

Prasetyo, D., Fakhriza, E., & Nugraha, B. S. (2025). Design and Experimental Evaluation of a Light Cut-off (Baffle) Plate for Aftermarket LED Motorcycle Headlamps. Journal of Automotive and Mechanical Applied Technology. https://doi.org/10.21831/jamat.v2i2.2462

Vancouver

Prasetyo D, Fakhriza E, Nugraha BS. Design and Experimental Evaluation of a Light Cut-off (Baffle) Plate for Aftermarket LED Motorcycle Headlamps. Journal of Automotive and Mechanical Applied Technology. 2025. doi:10.21831/jamat.v2i2.2462

BibTeX
@article{Prasetyo2025,
  author = {Prasetyo, Dwi and Fakhriza, Elky and Nugraha, Beni Setya},
  title = {Design and Experimental Evaluation of a Light Cut-off (Baffle) Plate for Aftermarket LED Motorcycle Headlamps},
  journal = {Journal of Automotive and Mechanical Applied Technology},
  year = {2025},
  doi = {10.21831/jamat.v2i2.2462}
}
Kostenlos starten →