EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Active Control of Properties of Fresh and Hardening Concrete

Geert De Schutter, Imene Abidi, Eleni Korda, Billy Boshoff, Kolawole Adisa Olonade, Didier Snoeck, Shravan Muthukrishnan, Yiyuan Zhang, Yaxin Tao, Swapnil Balasaheb Ghodke, Manu Kurungod Mohan, Mert Yücel Yardimci und 2 weitere

RILEM Technical Letters · 18.09.2024 · 8 · 198-203

DOI: 10.21809/rilemtechlett.2023.200 ↗

Kurz gefasst

Fachartikel in der Zeitschrift RILEM Technical Letters, online erschienen am 18.09.2024. Verfasst von Geert De Schutter und 13 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Concrete mixtures have an optimized mix design in view of attaining desired properties. However, after mixing, during further processing, it is typically not possible to further adjust the performance of the fresh and hardening concrete. A new and emerging approach is to actively control the concrete properties by means of responsive particles or polymers triggered by an externally applied signal. Active control of properties of concrete refers to the concept of on- demand changes of one or more properties of the concrete after mixing by triggering a response to one or more of the constituents using a specific trigger signal (e.g. thermal, chemical, electrical, magnetic...). The on-demand control of properties can focus on the processing stage (including e.g. pumping, casting, 3D printing), the curing and hardening stage (including e.g. control of capillary pressure, shrinkage, setting, and hardening) and even on the hardened stage during service life (e.g. active corrosion control, active crack healing...). Addressing specific obstacles in cementitious environments, ensuring responsive material stability, controlling signal applicability, cost, logistics, and on-site safety is crucial for successful implementation. A RILEM technical committee has been initiated in 2023, working on the concept of Active Control of Properties of Concrete (RILEM TC 317-ACP). The committee will focus on active control of properties of fresh and hardening concrete. This paper gives a short introduction to scope and activities of TC 317-ACP.

Zitieren

APA

Schutter, G. D., Abidi, I., Korda, E., Boshoff, B., Olonade, K. A., Snoeck, D., Muthukrishnan, S., Zhang, Y., Tao, Y., Ghodke, S. B., Mohan, M. K., Yardimci, M. Y., Jiao, D., & Sanjayan, J. (2024). Active Control of Properties of Fresh and Hardening Concrete. RILEM Technical Letters, 8, 198-203. https://doi.org/10.21809/rilemtechlett.2023.200

Vancouver

Schutter GD, Abidi I, Korda E, Boshoff B, Olonade KA, Snoeck D, et al. Active Control of Properties of Fresh and Hardening Concrete. RILEM Technical Letters. 2024;8:198-203. doi:10.21809/rilemtechlett.2023.200

BibTeX
@article{Schutter2024,
  author = {Schutter, Geert De and Abidi, Imene and Korda, Eleni and Boshoff, Billy and Olonade, Kolawole Adisa and Snoeck, Didier and Muthukrishnan, Shravan and Zhang, Yiyuan and Tao, Yaxin and Ghodke, Swapnil Balasaheb and Mohan, Manu Kurungod and Yardimci, Mert Yücel and Jiao, Dengwu and Sanjayan, Jay},
  title = {Active Control of Properties of Fresh and Hardening Concrete},
  journal = {RILEM Technical Letters},
  year = {2024},
  volume = {8},
  pages = {198--203},
  doi = {10.21809/rilemtechlett.2023.200}
}
Kostenlos starten →