EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

EFFECT OF LOADING CONFIGURATION ON MIXED-MODE DELAMINATION BEHAVIOR OF LAMINATED COMPOSITES

Ari Wahjudi, Anindito Purnowidodo, Agung Sugeng Widodo, Khairul Anam

Jurnal Rekayasa Mesin · 15.12.2025 · 16 (3) · 1251-1266

DOI: 10.21776/jrm.v16i3.2559 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Rekayasa Mesin, online erschienen am 15.12.2025. Verfasst von Ari Wahjudi und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Delamination is a critical interlaminar failure mode in laminated composites, particularly under mixed-mode loading where opening and shear mechanisms interact during crack propagation. This study investigates the effect of loading configuration and displacement ratio on mixed-mode delamination behavior using a finite element model incorporating finite-thickness cohesive zone elements. Three loading configurations, namely single-leg bending (SLB), modified single-leg bending (MSLB), and mixed-mode bending (MMB), were investigated. For MSLB and MMB, five additional-to-primary displacement ratios ranging from 0.5 to 2.5 were applied. Delamination behavior was evaluated in terms of load-displacement response, delamination area, and mode-mixity evolution. The results showed that increasing the displacement ratio increased the delamination area in both MSLB and MMB configurations. The MSLB delamination area increased from 15.04 to 30.71 mm², whereas the MMB area increased from 24.53 to 50.80 mm². MSLB exhibited a transition from predominantly shear-controlled toward greater opening contribution as the displacement ratio increased, while MMB remained predominantly shear-controlled during most of the propagation process. Among configurations with comparable maximum loads, MSLB 1.5 produced a smaller delamination area of 21.37 mm² than SLB of 23.90 mm², and MMB 1 of 28.96 mm². These findings demonstrate that mixed-mode delamination is governed by the interaction between loading configuration, displacement ratio, and evolving mode-mixity. The finite-thickness cohesive-zone approach provides an effective numerical framework for evaluating delamination propagation under different mixed-mode loading conditions.

Zitieren

APA

Wahjudi, A., Purnowidodo, A., Widodo, A. S., & Anam, K. (2025). EFFECT OF LOADING CONFIGURATION ON MIXED-MODE DELAMINATION BEHAVIOR OF LAMINATED COMPOSITES. Jurnal Rekayasa Mesin, 16(3), 1251-1266. https://doi.org/10.21776/jrm.v16i3.2559

Vancouver

Wahjudi A, Purnowidodo A, Widodo AS, Anam K. EFFECT OF LOADING CONFIGURATION ON MIXED-MODE DELAMINATION BEHAVIOR OF LAMINATED COMPOSITES. Jurnal Rekayasa Mesin. 2025;16(3):1251-1266. doi:10.21776/jrm.v16i3.2559

BibTeX
@article{Wahjudi2025,
  author = {Wahjudi, Ari and Purnowidodo, Anindito and Widodo, Agung Sugeng and Anam, Khairul},
  title = {EFFECT OF LOADING CONFIGURATION ON MIXED-MODE DELAMINATION BEHAVIOR OF LAMINATED COMPOSITES},
  journal = {Jurnal Rekayasa Mesin},
  year = {2025},
  volume = {16},
  number = {3},
  pages = {1251--1266},
  doi = {10.21776/jrm.v16i3.2559}
}
Kostenlos starten →