EUVIMEDEUVIMED entdecken
Crossref

RANCANG BANGUN ALAT UJI UNJUK KERJA TURBIN ULIR DENGAN SISTEM AKUISISI DATA UNTUK MEDIA PEMBELAJARAN PRAKTIKUM TURBIN AIR

Dovian Iswanda, Widodo Putra Suharto, Alban Naufal, Devi Andriani, Supandi Supandi, Nurhaidah Nurhaidah, Faino Faino

Jurnal Rekayasa Mesin · 26.04.2025 · 16 (1) · 37-50

DOI: 10.21776/jrm.v16i1.1506 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Rekayasa Mesin, online erschienen am 26.04.2025. Verfasst von Dovian Iswanda und 6 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To facilitate students' understanding of the types of water turbines, how they work, and the parameters that affect the performance of water turbines, it will be easier if the water turbine is made on a laboratory scale so that students can observe directly and students can change some parameters directly so that students understand the parameters that affect the performance of water turbines. In this research, a laboratory-scale screw turbine type water turbine will be made equipped with a data acquisition system where several sensors will be installed to read the parameters when the turbine is operating which then all parameters will be displayed on the LCD and recorded into memory automatically. This research was conducted using experimental methods by designing and manufacturing screw turbines using 3D Printing using digital prototyping techniques and designing a data acquisition system to facilitate parameter measurement. The results of the study obtained a screw turbine model with an outer diameter (Ro) of 0.07 m, an inner diameter (Ri) of 0.03 m, a pitch distance of 0.05 m, a thread length of 0.6 m, a maximum output power of 3.5 W at a discharge of 0.07 m3/s, maximum efficiency of 6 % at a discharge of 0.07 m3/s.

Zitieren

APA

Iswanda, D., Suharto, W. P., Naufal, A., Andriani, D., Supandi, S., Nurhaidah, N., & Faino, F. (2025). RANCANG BANGUN ALAT UJI UNJUK KERJA TURBIN ULIR DENGAN SISTEM AKUISISI DATA UNTUK MEDIA PEMBELAJARAN PRAKTIKUM TURBIN AIR. Jurnal Rekayasa Mesin, 16(1), 37-50. https://doi.org/10.21776/jrm.v16i1.1506

Vancouver

Iswanda D, Suharto WP, Naufal A, Andriani D, Supandi S, Nurhaidah N, et al. RANCANG BANGUN ALAT UJI UNJUK KERJA TURBIN ULIR DENGAN SISTEM AKUISISI DATA UNTUK MEDIA PEMBELAJARAN PRAKTIKUM TURBIN AIR. Jurnal Rekayasa Mesin. 2025;16(1):37-50. doi:10.21776/jrm.v16i1.1506

BibTeX
@article{Iswanda2025,
  author = {Iswanda, Dovian and Suharto, Widodo Putra and Naufal, Alban and Andriani, Devi and Supandi, Supandi and Nurhaidah, Nurhaidah and Faino, Faino},
  title = {RANCANG BANGUN ALAT UJI UNJUK KERJA TURBIN ULIR DENGAN SISTEM AKUISISI DATA UNTUK MEDIA PEMBELAJARAN PRAKTIKUM TURBIN AIR},
  journal = {Jurnal Rekayasa Mesin},
  year = {2025},
  volume = {16},
  number = {1},
  pages = {37--50},
  doi = {10.21776/jrm.v16i1.1506}
}
Kostenlos starten →