EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and application of a hydraulic performance evaluation method for denitrification reactors

Yisheng Zhang iD, Jie Xu iD, Siyi Wang iD, Dengke Yan iD, Haisong Li iD

Water Science & Technology · 01.07.2026 · 94 (1) · 180-197

DOI: 10.2166/wst.2026.307 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water Science & Technology, online erschienen am 29.06.2026. Verfasst von Yisheng Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Water Conservancy and Transportation, Zhengzhou University, Zhengzhou 450001, China. Hauptthemen laut MEDLINE: Bioreactors, Denitrification, Waste Disposal, Fluid. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Research and Development Program of Hunan Province of China, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The hydraulic characteristics of denitrification reactors are crucial for their efficient and stable operation. The absence of a quantitative assessment framework for reactor flow field structures hinders the establishment of a clear relationship between hydrodynamic conditions and denitrification performance, limiting wastewater treatment optimization. This study proposes a hydraulic performance evaluation method based on cross-sectional velocity distribution uniformity. By integrating computational fluid dynamics simulations with physical experimental validation, the internal flow characteristics of three reactor configurations with different water distributors – spiral flow reactor (SFR), upflow reactor (UFR), and downflow reactor (DFR) – were systematically analyzed. The results demonstrated that the SFR consistently formed a stable three-dimensional spiral flow pattern, exhibiting significantly higher velocity distribution uniformity in the 0.3–0.75 m core reaction zone compared with the UFR and DFR, thereby effectively mitigating short-circuiting and dead zones. All three reactors achieved optimal uniformity at a flow rate of 20 L/min, indicating the existence of an optimal operational condition. Robustness analysis confirmed that the proposed uniformity evaluation method was minimally influenced by the number and arrangement of monitoring points, with the coefficient of variation remaining below 14% under all tested conditions, demonstrating the method's strong stability and practical applicability.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

BioreactorsDenitrificationWaste Disposal, FluidHydrodynamics

Stichwörter der Autor:innen

denitrification reactorhydraulic characteristicsperformance evaluationvelocity distribution uniformity

Autor:innen und Institutionen

  • School of Water Conservancy and Transportation, Zhengzhou University, Zhengzhou 450001, China.
  • ZhiHe Environment Science & Technology Co. Ltd, Zhengzhou 450001, China.
  • College of Ecology and Environment, Zhengzhou University, Zhengzhou 450001, China E-mail: lhs@zzu.edu.cn.

ORCID-Profile: Yisheng Zhang, Jie Xu, Siyi Wang, Dengke Yan, Haisong Li

Förderung

  • Key Research and Development Program of Hunan Province of China
  • National Natural Science Foundation of China

Zitieren

APA

Zhang, Y., Xu, J., Wang, S., Yan, D., & Li, H. (2026). Development and application of a hydraulic performance evaluation method for denitrification reactors. Water Science & Technology, 94(1), 180-197. https://doi.org/10.2166/wst.2026.307

Vancouver

Zhang Y, Xu J, Wang S, Yan D, Li H. Development and application of a hydraulic performance evaluation method for denitrification reactors. Water Science & Technology. 2026;94(1):180-197. doi:10.2166/wst.2026.307

BibTeX
@article{Zhang2026,
  author = {Zhang, Yisheng and Xu, Jie and Wang, Siyi and Yan, Dengke and Li, Haisong},
  title = {Development and application of a hydraulic performance evaluation method for denitrification reactors},
  journal = {Water Science & Technology},
  year = {2026},
  volume = {94},
  number = {1},
  pages = {180--197},
  doi = {10.2166/wst.2026.307}
}
Kostenlos starten →