EUVIMEDEUVIMED entdecken
Open Access · CC BY-ND 4.0

Used water quality assessment using physical methods with microvolume analysis

Ken Chua, Julian Tay

Water Science & Technology · 15.07.2026 · 94 (2) · 229-246

DOI: 10.2166/wst.2026.302 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water Science & Technology, online erschienen am 18.06.2026. Verfasst von Ken Chua und 1 weiteren Autor:innen. Die Arbeit nennt 7 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Schematic diagram titled “Rapid Wastewater Screening Using Micro-Volume Physical Analysis” comparing conventional laboratory assessment with micro-volume physical analysis. The top-left panel shows conventional laboratory assessment requiring large sample volume, chemical reagents, and long analysis time. An arrow points to the top-right panel showing micro-volume physical analysis using ≤100 mL samples and measuring parameters such as pH, conductivity, UV-COD, color, and optical density. A downward arrow leads to an independent validation panel where micro-volume results are compared with external certified laboratory analysis. A left-pointing arrow leads to a rapid screening outcome panel highlighting on-site assessment, support for treatment design, and discharge readiness screening, with complementary use alongside lab testing. A final dashed box at the bottom shows future applications including microalgae screening and gas emission detection. Used water treatment relies heavily on quality assessment, traditionally based on chemical parameters such as pH, organic content and ion concentrations. Conventional methods typically require 500ml to one liter of sample to obtain certified results and often involve chemical reagents and can take long periods to yield results for specific parameters. Many treatment vendors operate remotely from plant sites, making rapid on-site water quality assessment essential for evaluating treatment feasibility. Additionally, air travel restrictions limiting liquids to 100ml highlight the need for micro volume analytical methods. Advances in physical sensing technologies and precision engineering enables such low volume approaches. Portable instruments can be combined to form a multi parameter assessment matrix using less than 100 ml of sample. Selected wastewater samples were analysed using this approach and compared against certified external laboratory measurements to evaluate indicative agreement under field sampling conditions. The proposed method provides rapid screening capability for wastewater characterization and discharge assessment and is intended as a complementary on-site diagnostic tool rather than replacement for comprehensive laboratory testing. To extend this approach, a syringe filter color chart was developed to assess microalgae in eutrophic waters, and a confined air purge test was introduced to characterize gas emissions.

Zitieren

APA

Chua, K., & Tay, J. (2026). Used water quality assessment using physical methods with microvolume analysis. Water Science & Technology, 94(2), 229-246. https://doi.org/10.2166/wst.2026.302

Vancouver

Chua K, Tay J. Used water quality assessment using physical methods with microvolume analysis. Water Science & Technology. 2026;94(2):229-246. doi:10.2166/wst.2026.302

BibTeX
@article{Chua2026,
  author = {Chua, Ken and Tay, Julian},
  title = {Used water quality assessment using physical methods with microvolume analysis},
  journal = {Water Science & Technology},
  year = {2026},
  volume = {94},
  number = {2},
  pages = {229--246},
  doi = {10.2166/wst.2026.302}
}
Kostenlos starten →