EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Investigations into the flocculent settling of microplastics

S Sethulekshmi iD, Pradip Kalbar iD, Amritanshu Shriwastav iD

Water Science & Technology · 01.05.2026 · 93 (9) · 1296-1309

DOI: 10.2166/wst.2026.269 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water Science & Technology, online erschienen am 30.04.2026. Verfasst von S Sethulekshmi und 2 weiteren Autor:innen. Beteiligte Einrichtung: Environmental Science and Engineering Department, Indian Institute of Technology Bombay, Mumbai 400 076, India. Hauptthemen laut MEDLINE: Microplastics, Waste Disposal, Fluid, Water Pollutants, Chemical. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Figure showing a summary of experimental setup for settling experiments, effect of sludge concentration on microplastic removal efficiency, and the isoremoval plots for microplastics with depth and settling time. Sewage treatment plants (STPs) act as both significant sinks and sources of microplastics (MPs) in the environment. However, there is a lack of investigations into the flocculent settling characteristics of MPs and their removal trends in secondary clarifiers. Therefore, this study attempted to explore the flocculent settling behaviour of small-sized (15–105 μm) MPs of polymer types: nylon, polystyrene, polypropylene, and low-density polyethylene through controlled lab-scale experiments. Results showed that the MPs’ removal with flocculent settling improved from 55 to over 80% as sludge mixed liquor suspended solids (MLSS) concentration increased from 50 to ∼1,000 mg/L, highlighting the importance of MLSS in MPs’ retention. Furthermore, a lab-scale prototype of a secondary clarifier was used to study flocculent settling trends of a mixture of rising and settling polymers, and iso-removal plots for MPs’ flocculent settling were plotted, which provide an estimation of secondary clarifier removal efficiencies. It was observed that approximately 94% of MPs were effectively removed in secondary clarifiers under optimized conditions. This study provides novel insights into the flocculent settling characteristics of MPs in secondary treatment, improving our understanding of their fate in STPs and strategies to enhance MP removal efficiency.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

MicroplasticsWaste Disposal, FluidWater Pollutants, ChemicalFlocculationSewage

Stichwörter der Autor:innen

fateflocculationmicroplasticssecondary clarifiersewage treatment

Substanzen

MicroplasticsWater Pollutants, ChemicalSewage

Autor:innen und Institutionen

  • Environmental Science and Engineering Department, Indian Institute of Technology Bombay, Mumbai 400 076, India.
  • Environmental Science and Engineering Department, Indian Institute of Technology Bombay, Mumbai 400 076, India E-mail: amritan@iitb.ac.in.

ORCID-Profile: S Sethulekshmi, Pradip Kalbar, Amritanshu Shriwastav

Zitieren

APA

Sethulekshmi, S., Kalbar, P., & Shriwastav, A. (2026). Investigations into the flocculent settling of microplastics. Water Science & Technology, 93(9), 1296-1309. https://doi.org/10.2166/wst.2026.269

Vancouver

Sethulekshmi S, Kalbar P, Shriwastav A. Investigations into the flocculent settling of microplastics. Water Science & Technology. 2026;93(9):1296-1309. doi:10.2166/wst.2026.269

BibTeX
@article{Sethulekshmi2026,
  author = {Sethulekshmi, S and Kalbar, Pradip and Shriwastav, Amritanshu},
  title = {Investigations into the flocculent settling of microplastics},
  journal = {Water Science & Technology},
  year = {2026},
  volume = {93},
  number = {9},
  pages = {1296--1309},
  doi = {10.2166/wst.2026.269}
}
Kostenlos starten →