EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

A statistical method for obtaining an hour-level design storm of urban stormwater source control

Sheng Wang iD, Wanzhen Wei iD, Lidan Feng iD, Yezi Yuan iD, Zeyang Wang

Water Science & Technology · 2025

DOI: 10.2166/wst.2025.122 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water Science & Technology, 2025. Verfasst von Sheng Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Water Pollution Control and Green Resource Recycling, College of Environmental Science and Engineering, Tongji University, Sh…. Hauptthemen laut MEDLINE: Rain, Water Movements. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In urban stormwater source control design, the current method statistically obtains the design target-daily rainfall relationship and uses daily rainfall as the design storm to calculate the size of source control. Since it lacks the rainfall duration needed for sizing calculations under the design storm, it cannot ensure that the design solution achieves the design target. To overcome this problem, this study proposes a statistical method to obtain an hour-level design storm. It includes hour-level event identification, the concept of design storm event set, and a method to obtain the design target-rainfall-duration-maximum 1-h rainfall relationship. Model-based case study results suggested that rainfall volume control was more suitable than rainfall event percentile control as a design target because design solutions achieved the former but not the latter. Across six climate conditions, rainfalls and durations had logarithmic correlations ranging from 0.8454 to 0.9868. The positive near-monotonic relationships supported the source control sizing calculation under the design storm. Besides, a maximum 1-h rainfall could be used to calculate the hydraulic conductivity of planting soil layers, ensuring that the runoff peak penetrates the source control rather than off-site discharge through overflow. The hour-level design storm includes rainfall duration and maximum 1-h rainfall that vary with design target and design rainfall, which is an advantage over a day-level design storm.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

RainWater MovementsCitiesModels, Theoretical

Stichwörter der Autor:innen

design storm statistical methodrainfall event percentile control targetrainfall volume control targetsource controlurban drainage

Autor:innen und Institutionen

  • State Key Laboratory of Water Pollution Control and Green Resource Recycling, College of Environmental Science and Engineering, Tongji University, Shanghai 200092, China.
  • Key Laboratory of Yangtze River Water Environment (Ministry of Education), Tongji University, Shanghai 200092, China E-mail: wangs_tj@tongji.edu.cn.
  • Xiamen Urban Planning & Design Institute Co. Ltd., Xiamen 361012, China.

ORCID-Profile: Sheng Wang, Wanzhen Wei, Lidan Feng, Yezi Yuan

Zitieren

APA

Wang, S., Wei, W., Feng, L., Yuan, Y., & Wang, Z. (2025). A statistical method for obtaining an hour-level design storm of urban stormwater source control. Water Science & Technology. https://doi.org/10.2166/wst.2025.122

Vancouver

Wang S, Wei W, Feng L, Yuan Y, Wang Z. A statistical method for obtaining an hour-level design storm of urban stormwater source control. Water Science & Technology. 2025. doi:10.2166/wst.2025.122

BibTeX
@article{Wang2025,
  author = {Wang, Sheng and Wei, Wanzhen and Feng, Lidan and Yuan, Yezi and Wang, Zeyang},
  title = {A statistical method for obtaining an hour-level design storm of urban stormwater source control},
  journal = {Water Science & Technology},
  year = {2025},
  doi = {10.2166/wst.2025.122}
}
Kostenlos starten →