EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Quantifying sediment deposition in sewers through hydraulic performance analysis

Zhi Yang, Biao Huang iD, David Z Zhu

Water Science & Technology · 01.05.2025 · 91 (9) · 1058-1076

DOI: 10.2166/wst.2025.057 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water Science & Technology, online erschienen am 28.04.2025. Verfasst von Zhi Yang und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil and Environmental Engineering, Ningbo University, Ningbo, Zhejiang 315211, China. Hauptthemen laut MEDLINE: Geologic Sediments, Sewage, Waste Disposal, Fluid, Drainage, Sanitary. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, Zhejiang Provincial Natural Science Foundation of China, Ningbo Young Technology Innovation Leading Talent Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the effects of fixed sediment deposition on the hydraulic characteristics of sewer flow to support the diagnosis of sewer blockage. Sediment beds extending over the entire pipe (i.e., continuous deposition) and localized deposits were examined under different flow rates and outlet control conditions. Continuous deposition changes the cross-sectional area of the sewer pipe, while localized deposits act similarly to short bottom obstructions. The energy losses induced by a localized deposit at various locations were found to be nearly identical, particularly in cases with backwater effects. To illustrate the relationships between the flow rate, water level, and deposit characteristics, hydraulic performance curves can be developed. The inverse problem, which involves estimating parameters characterizing sediment deposition using observed flow rates and upstream and downstream water levels, can be solved by matching hydraulic performance curves with numerous scatter points from actual monitoring data to obtain the best fit. As there is a wide range of sediment deposition patterns that result in the same overall energy loss, the concept of equivalent sediment bed height is introduced to be applied in real-world scenarios.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Geologic SedimentsSewageWaste Disposal, FluidDrainage, SanitaryWater MovementsModels, Theoretical

Stichwörter der Autor:innen

flow monitoringhydraulic performanceinverse problemsediment depositionsewer

Substanzen

Sewage

Autor:innen und Institutionen

  • School of Civil and Environmental Engineering, Ningbo University, Ningbo, Zhejiang 315211, China.
  • School of Civil Engineering and Architecture, Taizhou University, Taizhou, Zhejiang 318000, China.
  • School of Civil and Environmental Engineering, Ningbo University, Ningbo, Zhejiang 315211, China E-mail: huangbiao@nbu.edu.cn.
  • Department of Civil and Environmental Engineering, University of Alberta, Edmonton, Alberta, Canada.

ORCID-Profile: Biao Huang

Förderung

  • National Key R&D Program of China
  • Zhejiang Provincial Natural Science Foundation of China
  • Ningbo Young Technology Innovation Leading Talent Program

Zitieren

APA

Yang, Z., Huang, B., & Zhu, D. Z. (2025). Quantifying sediment deposition in sewers through hydraulic performance analysis. Water Science & Technology, 91(9), 1058-1076. https://doi.org/10.2166/wst.2025.057

Vancouver

Yang Z, Huang B, Zhu DZ. Quantifying sediment deposition in sewers through hydraulic performance analysis. Water Science & Technology. 2025;91(9):1058-1076. doi:10.2166/wst.2025.057

BibTeX
@article{Yang2025,
  author = {Yang, Zhi and Huang, Biao and Zhu, David Z},
  title = {Quantifying sediment deposition in sewers through hydraulic performance analysis},
  journal = {Water Science & Technology},
  year = {2025},
  volume = {91},
  number = {9},
  pages = {1058--1076},
  doi = {10.2166/wst.2025.057}
}
Kostenlos starten →