EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Use of a numerical model to evaluate SO2 absorption efficiency by sodium sulfite in packed and spray columns

Rodolphe Vautherin iD, Hélène Métivier iD, Anne Reguer, Hassen Benbelkacem iD

Water Science & Technology · 2025

DOI: 10.2166/wst.2025.049 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water Science & Technology, 2025. Verfasst von Rodolphe Vautherin und 3 weiteren Autor:innen. Beteiligte Einrichtung: INSA Lyon, DEEP, UR7429, Villeurbanne 69621, France. Hauptthemen laut MEDLINE: Sulfites, Sulfur Dioxide, Models, Theoretical. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: H2020 Research and Innovation program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Numerical modeling has been used extensively to simulate gas–liquid transfer of sulfur dioxide, assessing how operational parameters affect absorption efficiency in packed or spray columns. Despite individual studies on these contactors, comparative analyses on the same flue gas have been rare. This study uses a numerical model for both packed and spray columns to examine how parameters influence SO2 absorption by sodium sulfite, describing packed and spray columns, is used to investigate the influence of operational parameters on SO2 absorption by sodium sulfite. The model's predictions are validated against experimental data from an industrial pilot plant. Across varying conditions (L/G ratio, temperature, initial SO2 content or initial S(IV) concentration), the packed column achieves higher absorption efficiencies compared to the spray column, with lower assumed energy costs due to a reduced L/G ratio. Temperature proves to be a significant factor, decreasing absorption efficiency by approximately 40% between 40 and 70 °C. SO2 absorption efficiency declines with increasing concentrations of bisulfite and sulfite ions in the absorption solution, dropping to 50% at an S(IV) concentration of 2 kmol m−3 in the liquid phase. Considering the objective of producing a concentrated bisulfite solution and a clean gas, a two-column system is recommended: one for bisulfite solution concentration at acidic pH and the other for gas purification enhancement at basic pH.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SulfitesSulfur DioxideModels, TheoreticalTemperature

Stichwörter der Autor:innen

SO2 absorptionflue gas desulfurizationmodelingpacked columnspray columnsulfur recovery

Substanzen

SulfitesSulfur Dioxidesodium sulfite

Autor:innen und Institutionen

  • INSA Lyon, DEEP, UR7429, Villeurbanne 69621, France.
  • SUEZ IWS, 1 Buster Keaton, Saint-Priest 69800, France.
  • INSA Lyon, DEEP, UR7429, Villeurbanne 69621, France E-mail: hassen.benbelkacem@insa-lyon.fr.

ORCID-Profile: Rodolphe Vautherin, Hélène Métivier, Hassen Benbelkacem

Förderung

  • H2020 Research and Innovation program

Zitieren

APA

Vautherin, R., Métivier, H., Reguer, A., & Benbelkacem, H. (2025). Use of a numerical model to evaluate SO2 absorption efficiency by sodium sulfite in packed and spray columns. Water Science & Technology. https://doi.org/10.2166/wst.2025.049

Vancouver

Vautherin R, Métivier H, Reguer A, Benbelkacem H. Use of a numerical model to evaluate SO2 absorption efficiency by sodium sulfite in packed and spray columns. Water Science & Technology. 2025. doi:10.2166/wst.2025.049

BibTeX
@article{Vautherin2025,
  author = {Vautherin, Rodolphe and Métivier, Hélène and Reguer, Anne and Benbelkacem, Hassen},
  title = {Use of a numerical model to evaluate SO2 absorption efficiency by sodium sulfite in packed and spray columns},
  journal = {Water Science & Technology},
  year = {2025},
  doi = {10.2166/wst.2025.049}
}
Kostenlos starten →