Simulation-based process optimization of full-scale advanced wastewater treatment systems using powdered activated carbon
Water Science & Technology · 01.12.2024 · 90 (11) · 3008-3028
DOI: 10.2166/wst.2024.382 ↗Kurz gefasst
Fachartikel in der Zeitschrift Water Science & Technology, online erschienen am 21.11.2024. Verfasst von Hana Atallah Al-Asad und 3 weiteren Autor:innen. Beteiligte Einrichtung: University of Kassel, Chair of Urban Water Engineering, Kurt-Wolters-Street 3, Kassel 34125, Germany; ifak - Institute for Automation and Communicati…. Hauptthemen laut MEDLINE: Charcoal, Water Pollutants, Chemical, Waste Disposal, Fluid. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Bildung und Forschung.
Abstract (Originalsprache)
This study extends a previously developed competitive modeling approach for predicting the adsorption of organic micropollutants (OMPs) on powdered activated carbon (PAC) in full-scale advanced wastewater treatment. The approach incorporates adsorption analysis for organic matter fractionation, assumes pseudo-first order kinetics and differentiates between fresh and partially loaded PAC through fraction segregation. Validation through full-scale measurement campaigns reveals successful model predictions of OMP removal, underestimating, however, diclofenac removals by 15–20%. Based on model testing, the impact of excess PAC return to the biological stage enhanced OMP removal, reaching up to 15% improvement for benzotriazole, carbamazepine and metoprolol, but no evident improvement of diclofenac removal. Intermittent PAC dosing revealed rapid process response, where organic matter concentration increased within 2 h after PAC cut-off. The simulation-based study demonstrated that during rain events, the overall OMP removal efficiency in the entire wastewater treatment plant was reduced by approximately 50% due to a shift of OMP concentration and a shortened hydraulic retention time in the biological and adsorption stages. Testing of various PAC dosing strategies revealed potential PAC savings of 10–15% compared to inflow-proportional dosing by using predefined OMP removal grades or maximum allowable effluent OMP concentrations as criteria for PAC dosing.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- University of Kassel, Chair of Urban Water Engineering, Kurt-Wolters-Street 3, Kassel 34125, Germany; ifak - Institute for Automation and Communication, Werner-Heisenberg-Str. 1, Magdeburg 39106 Germany.
- ifak - Institute for Automation and Communication, Werner-Heisenberg-Str. 1, Magdeburg 39106 Germany.
- University of Kassel, Chair of Urban Water Engineering, Kurt-Wolters-Street 3, Kassel 34125, Germany.
- University of Kassel, Chair of Urban Water Engineering, Kurt-Wolters-Street 3, Kassel 34125, Germany E-mail: morck@uni-kassel.de.
ORCID-Profile: Tobias Morck
Förderung
- Bundesministerium für Bildung und Forschung
Zitieren
APA
Atallah Al-Asad, H., Alex, J., Parniske, J., & Morck, T. (2024). Simulation-based process optimization of full-scale advanced wastewater treatment systems using powdered activated carbon. Water Science & Technology, 90(11), 3008-3028. https://doi.org/10.2166/wst.2024.382
Vancouver
Atallah Al-Asad H, Alex J, Parniske J, Morck T. Simulation-based process optimization of full-scale advanced wastewater treatment systems using powdered activated carbon. Water Science & Technology. 2024;90(11):3008-3028. doi:10.2166/wst.2024.382
BibTeX
@article{AtallahAlAsad2024,
author = {Atallah Al-Asad, Hana and Alex, Jens and Parniske, Janna and Morck, Tobias},
title = {Simulation-based process optimization of full-scale advanced wastewater treatment systems using powdered activated carbon},
journal = {Water Science & Technology},
year = {2024},
volume = {90},
number = {11},
pages = {3008--3028},
doi = {10.2166/wst.2024.382}
}
EUVIMED