Electrochemically produced nano-TiO2-coated SiC membranes for photocatalytic water treatment: Preparation, characterization, and hydroxyl radical formation
Water Science & Technology · 2024
DOI: 10.2166/wst.2024.152 ↗Kurz gefasst
Fachartikel in der Zeitschrift Water Science & Technology, 2024. Verfasst von Sarah Trepte und 3 weiteren Autor:innen. Beteiligte Einrichtung: Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Winterbergstrasse 28, Dresden 01277, Germany E-mail: sarah.trepte@ikts.fraunhofer.de. Hauptthemen laut MEDLINE: Titanium, Hydroxyl Radical, Water Purification, Silicon Compounds. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Bundesstiftung Umwelt.
Abstract (Originalsprache)
Photocatalytically active ceramic flat sheet membranes based on a nanostructured titanium dioxide (TiO2) coating were produced for photocatalytic water treatment. The nano-TiO2 layer was produced by a novel combination of magnetron sputtering of a thin titanium layer on silicon carbide (SiC) membranes, followed by electrochemical oxidation (anodization) and subsequent heat treatment (HT). Characterization by Raman spectra and field emission scanning electron microscopy proved the presence of a nanostructured anatase layer on the membranes. The influence of the titanium layer thickness on the TiO2 formation process and the photocatalytic properties were investigated using anodization curves, by using cyclovoltammetry measurements, and by quantifying the generated hydroxyl radicals (OH•) under UV-A irradiation in water. Promising photocatalytic activity and permeability of the nano-TiO2-coated membranes could be demonstrated. A titanium layer of at least 2 μm was necessary for significant photocatalytic effects. The membrane sample with a 10 μm Ti/TiO2 layer had the highest photocatalytic activity showing a formation rate of 1.26 × 10−6 mmol OH• s−1. Furthermore, the membranes were tested several times, and a decrease in radical formation was observed. Assuming that these can be attributed to adsorption processes of the reactants, initial experiments were carried out to reactivate the photocatalyzer.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Winterbergstrasse 28, Dresden 01277, Germany E-mail: sarah.trepte@ikts.fraunhofer.de.
- Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Winterbergstrasse 28, Dresden 01277, Germany.
ORCID-Profile: Sarah Trepte, Claudia Kutzer-Schulze, Ulrike Langklotz, Mario Krug
Förderung
- Deutsche Bundesstiftung Umwelt
Zitieren
APA
Trepte, S., Kutzer-Schulze, C., Langklotz, U., & Krug, M. (2024). Electrochemically produced nano-TiO2-coated SiC membranes for photocatalytic water treatment: Preparation, characterization, and hydroxyl radical formation. Water Science & Technology. https://doi.org/10.2166/wst.2024.152
Vancouver
Trepte S, Kutzer-Schulze C, Langklotz U, Krug M. Electrochemically produced nano-TiO2-coated SiC membranes for photocatalytic water treatment: Preparation, characterization, and hydroxyl radical formation. Water Science & Technology. 2024. doi:10.2166/wst.2024.152
BibTeX
@article{Trepte2024,
author = {Trepte, Sarah and Kutzer-Schulze, Claudia and Langklotz, Ulrike and Krug, Mario},
title = {Electrochemically produced nano-TiO2-coated SiC membranes for photocatalytic water treatment: Preparation, characterization, and hydroxyl radical formation},
journal = {Water Science & Technology},
year = {2024},
doi = {10.2166/wst.2024.152}
}
EUVIMED