EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modelling effluent reuse in the pulp and paper industry to predict consequences on conductivity

Stephanie Prasse iD, Patrick Huber, Pascal Ottenio, Eric Fourest

Water Science & Technology · 2024

DOI: 10.2166/wst.2024.113 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water Science & Technology, 2024. Verfasst von Stephanie Prasse und 3 weiteren Autor:innen. Beteiligte Einrichtung: Centre Technique du Papier, CS90251 38044 Grenoble cedex 9, France E-mail: stephanie.prasse@webctp.com. Hauptthemen laut MEDLINE: Paper, Industrial Waste, Waste Disposal, Fluid, Recycling. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: H2020 European Institute of Innovation and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of this study was to assess, through simulation, conductivity variations in pulp and paper circuits when recycling waste water treatment plant (WWTP) effluent with a view to reducing fresh water use in a tissue mill. WWTP effluent was recycled in the process for different uses. A PS2000 digital model coupled with the PHREEQC chemical simulation engine was used to identify and quantify the main sources of conductivity: caustic soda, sodium bisulphite and acetate production through anaerobic microbial activity. Recycling WWTP effluent enables fresh water uptake to be reduced by 50% when used for pulp dilution or white water, by 81% when used in paper machine showers, and up to 96% for all uses combined. As fresh water use decreases, circuit closure increases along with, consequently, COD and conductivity. COD build-up can be controlled by best available techniques application. Recycling WWTP effluent has a strong impact on conductivity. However, the impact of high conductivity levels on additives performance is limited in the case of the mill studied. Acetate concentration could be controlled by better agitation of tanks or the introduction of air by pumps. Furthermore, limiting acetate production can reduce the need for caustic soda to control the pH.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PaperIndustrial WasteWaste Disposal, FluidRecyclingElectric ConductivityModels, TheoreticalWastewater

Stichwörter der Autor:innen

conductivitymodellingpulp and paper industryreuse

Substanzen

Industrial WasteWastewater

Autor:innen und Institutionen

  • Centre Technique du Papier, CS90251 38044 Grenoble cedex 9, France E-mail: stephanie.prasse@webctp.com.
  • Centre Technique du Papier, CS90251 38044 Grenoble cedex 9, France.

ORCID-Profile: Stephanie Prasse

Förderung

  • H2020 European Institute of Innovation and Technology

Zitieren

APA

Prasse, S., Huber, P., Ottenio, P., & Fourest, E. (2024). Modelling effluent reuse in the pulp and paper industry to predict consequences on conductivity. Water Science & Technology. https://doi.org/10.2166/wst.2024.113

Vancouver

Prasse S, Huber P, Ottenio P, Fourest E. Modelling effluent reuse in the pulp and paper industry to predict consequences on conductivity. Water Science & Technology. 2024. doi:10.2166/wst.2024.113

BibTeX
@article{Prasse2024,
  author = {Prasse, Stephanie and Huber, Patrick and Ottenio, Pascal and Fourest, Eric},
  title = {Modelling effluent reuse in the pulp and paper industry to predict consequences on conductivity},
  journal = {Water Science & Technology},
  year = {2024},
  doi = {10.2166/wst.2024.113}
}
Kostenlos starten →