Discharge coefficient of vertical sluice gates with broad crested weir under free-submerged orifice flows using best subset regression
Water Science & Technology · 01.04.2024 · 89 (7) · 1816-1830
DOI: 10.2166/wst.2024.102 ↗Kurz gefasst
Fachartikel in der Zeitschrift Water Science & Technology, online erschienen am 29.03.2024. Verfasst von Zhuoying Cang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Port, Waterway and Sedimentation Engineering of Ministry of Transport, Nanjing Hydraulic Research Institute, Nanjing 210024, China. Hauptthemen laut MEDLINE: Water Supply. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
Accurate calculation of flow discharge for sluice gates is essential in irrigation, water supply, and structure safety. The measurement of discharge with the requirement of distinguishing flow regimes is not conducive to application. In this study, a novel approach that considers both free and submerged flow was proposed. The energy–momentum method was employed to derive the coefficient of discharge. Subsequently, the discharge coefficient was determined through the experiment which was performed on the physical model of a vertical sluice gate with a broad-crested weir. Feature engineering, incorporating dimensional analysis, feature construction, and correlation-based selection were performed. The best subset regression method was employed to develop regression equations of the discharge coefficient with the generated features. The derived formula was applied to compute the discharge coefficient in the vertical sluice gate and determine the flow discharge. The accuracy of adopted method was assessed by comparing it with recent studies on submerged flow, and the results demonstrate that the developed approach achieves a high level of accuracy in calculating flow discharge. The coefficient of determination for the calculated flow rate is 0.993, and the root mean square percentage error is 5.04%.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Port, Waterway and Sedimentation Engineering of Ministry of Transport, Nanjing Hydraulic Research Institute, Nanjing 210024, China.
- Key Laboratory of Port, Waterway and Sedimentation Engineering of Ministry of Transport, Nanjing Hydraulic Research Institute, Nanjing 210024, China; Yangtze Institute for Conservation and Development, Nanjing 210024, C…
ORCID-Profile: Zhuoying Cang
Förderung
- National Key R&D Program of China
- National Natural Science Foundation of China
Zitieren
APA
Cang, Z., Jia, D., Wang, J., Yang, J., Hao, Y., & Chen, X. (2024). Discharge coefficient of vertical sluice gates with broad crested weir under free-submerged orifice flows using best subset regression. Water Science & Technology, 89(7), 1816-1830. https://doi.org/10.2166/wst.2024.102
Vancouver
Cang Z, Jia D, Wang J, Yang J, Hao Y, Chen X. Discharge coefficient of vertical sluice gates with broad crested weir under free-submerged orifice flows using best subset regression. Water Science & Technology. 2024;89(7):1816-1830. doi:10.2166/wst.2024.102
BibTeX
@article{Cang2024,
author = {Cang, Zhuoying and Jia, Dongdong and Wang, Jinyang and Yang, Jun and Hao, Youzhi and Chen, Xiaona},
title = {Discharge coefficient of vertical sluice gates with broad crested weir under free-submerged orifice flows using best subset regression},
journal = {Water Science & Technology},
year = {2024},
volume = {89},
number = {7},
pages = {1816--1830},
doi = {10.2166/wst.2024.102}
}
EUVIMED