EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Particle separator with vortex claw: an efficient and new technology

Cheng He, Padala Chittibabu, David Nguyen, Quintin Rochfort

Water Science & Technology · 15.03.2024 · 89 (6) · 1441-1453

DOI: 10.2166/wst.2024.072 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water Science & Technology, online erschienen am 06.03.2024. Verfasst von Cheng He und 3 weiteren Autor:innen. Beteiligte Einrichtung: National Water Research Institute, Environment Canada, 867 Lakeshore Road, Burlington, Ontario, Canada L7S 1A1 E-mail: cheng.he@ec.gc.ca. Hauptthemen laut MEDLINE: Technology. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Great Lake Action Plan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Despite facing many challenges, the exploration of using natural forces and mechanisms besides gravity to enhance particle settling has never ceased. A novel particle separator design, which utilizes multiple vortexes to enhance particle settling, was proposed in this study. The basic principle is using the fluid's energy to generate small swirling currents in a specially designed vortex claw generator. These currents bring suspended particles from the rapid and turbulent inflow to relatively quiet water regions, separating them from the main flows and reducing their travel distance to the wall. To verify the new separator design's performance, comparison studies were carried out in the laboratory using physical models. The results showed that the new design had much higher particle capture rates for the same inflow rates and tested particle sizes. Most importantly, it was able to effectively remove small particles, and particle capture rates were much less affected by fluctuations in inflow rates. Since most existing particle separators failed to perform well under large inflow rates, these characteristics make the new design stand out from other separators. Due to its special structure, its treatment capacity can also be easily increased without changing its horizontal separator size.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TechnologyParticle Size

Stichwörter der Autor:innen

enhancing particle settlingphysical modelingvortex separator

Autor:innen und Institutionen

  • National Water Research Institute, Environment Canada, 867 Lakeshore Road, Burlington, Ontario, Canada L7S 1A1 E-mail: cheng.he@ec.gc.ca.
  • National Water Research Institute, Environment Canada, 867 Lakeshore Road, Burlington, Ontario, Canada L7S 1A1.
  • School of Engineering, University of Guelph, 50 Stone Road East, Guelph, Ontario, Canada N1G 2W1.

Förderung

  • Great Lake Action Plan

Zitieren

APA

He, C., Chittibabu, P., Nguyen, D., & Rochfort, Q. (2024). Particle separator with vortex claw: an efficient and new technology. Water Science & Technology, 89(6), 1441-1453. https://doi.org/10.2166/wst.2024.072

Vancouver

He C, Chittibabu P, Nguyen D, Rochfort Q. Particle separator with vortex claw: an efficient and new technology. Water Science & Technology. 2024;89(6):1441-1453. doi:10.2166/wst.2024.072

BibTeX
@article{He2024,
  author = {He, Cheng and Chittibabu, Padala and Nguyen, David and Rochfort, Quintin},
  title = {Particle separator with vortex claw: an efficient and new technology},
  journal = {Water Science & Technology},
  year = {2024},
  volume = {89},
  number = {6},
  pages = {1441--1453},
  doi = {10.2166/wst.2024.072}
}
Kostenlos starten →