EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

CFD modelling of an immobilised photocatalytic reactor for phenol degradation

B Devipriya, Sreelal Mohanan iD, Anupama Surenjan iD

Water Science & Technology · 15.10.2023 · 88 (8) · 2121-2135

DOI: 10.2166/wst.2023.306 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water Science & Technology, online erschienen am 27.09.2023. Verfasst von B Devipriya und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, National Institute of Technology Karnataka, Surathkal, P.O. Srinivasnagar, Mangalore 575025, India E-mail: anupama@n…. Hauptthemen laut MEDLINE: Hydrodynamics, Environmental Pollution. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Photocatalysis is an advanced oxidation process, which has been gaining attention as a sustainable technology for tackling pollution. Optimum design, fabrication and scaling up of novel photocatalytic reactors are faced with problems such as fabrication cost and numerous experimental trials for optimisation. Computational fluid dynamics (CFD), a computer simulation technique can ease the process of scaling up photocatalytic reactors. The current study focuses on CFD modelling of a serpentine flow path photocatalytic reactor with curved baffles for phenol degradation. The investigation compared different reactor configurations to finalise the optimum design with maximum removal efficiency. Initially, a simple cuboidal reactor was chosen with an efficiency of 27%. However, with a serpentine flow path being introduced, the reactor displayed an improved efficiency of 42%. The addition of baffles improved flow homogeneity and degradation efficiency. The investigation showed that serpentine flow increased the residence time and fluid mixing, while the curved baffles prevented flow channelisation, which enhanced the degradation efficiency. Efficiencies corresponding to different baffle types and geometry were also compared and the final reactor design chosen was a horizontal curved baffled serpentine flow reactor with a flow rate of 0.3 L/s and improved efficiency of 43.1% for a residence time of 18.44 s.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

HydrodynamicsEnvironmental PollutionComputer SimulationOxidation-ReductionPhenols

Substanzen

Phenols

Autor:innen und Institutionen

  • Department of Civil Engineering, National Institute of Technology Karnataka, Surathkal, P.O. Srinivasnagar, Mangalore 575025, India E-mail: anupama@nitk.edu.in.
  • Department of Aerospace Engineering, Indian Institute of Technology Madras, Chennai, Tamilnadu 600036, India.
  • Department of Civil Engineering, National Institute of Technology Karnataka, Surathkal, P.O. Srinivasnagar, Mangalore 575025, India.

ORCID-Profile: Sreelal Mohanan, Anupama Surenjan

Zitieren

APA

Devipriya, B., Mohanan, S., & Surenjan, A. (2023). CFD modelling of an immobilised photocatalytic reactor for phenol degradation. Water Science & Technology, 88(8), 2121-2135. https://doi.org/10.2166/wst.2023.306

Vancouver

Devipriya B, Mohanan S, Surenjan A. CFD modelling of an immobilised photocatalytic reactor for phenol degradation. Water Science & Technology. 2023;88(8):2121-2135. doi:10.2166/wst.2023.306

BibTeX
@article{Devipriya2023,
  author = {Devipriya, B and Mohanan, Sreelal and Surenjan, Anupama},
  title = {CFD modelling of an immobilised photocatalytic reactor for phenol degradation},
  journal = {Water Science & Technology},
  year = {2023},
  volume = {88},
  number = {8},
  pages = {2121--2135},
  doi = {10.2166/wst.2023.306}
}
Kostenlos starten →