EUVIMEDEUVIMED entdecken
Crossref

Evaluating volumetric efficiency in a hydraulic ram pump through component configuration

Mohammadreza Ghomi, Ulrike Gayh, Jens Kuhn, Josué Emiliano Romero Moreno, Amr Samir Soliman Mahmoud, Het Pandya, Omar Khedr, Abhishek Chowfin, Siar Amin, Grit Hoffmann, Stefan Panglisch

Water Practice & Technology · 01.03.2026 · 21 (3) · 1045-1052

DOI: 10.2166/wpt.2026.240 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water Practice & Technology, online erschienen am 06.03.2026. Verfasst von Mohammadreza Ghomi und 10 weiteren Autor:innen. Die Arbeit nennt 12 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The hydraulic ram pump is a sustainable, non-electrical device for water lifting, but its volumetric efficiency needs improvement for wider use. This study aimed to optimize pump performance by testing key components. In the first trial, with a delivery head of 2.5 m, the air chamber and waste valve size were kept stable. The optimal configuration used a 1-inch delivery valve with a 6 mm waste valve gap, achieving a high volumetric efficiency of 14.14%. In the second trial, with a higher delivery head of 5.0 m, the best performance (7.82%) was achieved using a larger 1¼-inch waste valve and a 1¼-inch delivery valve, combined with an air chamber filled to 80% with water. Statistical analysis revealed that higher efficiency was strongly linked to shorter operational times (R = −0.67) and higher system pressure (R = 0.55). This shows that the most efficient design depends on the operating conditions. For lower lifts, a moderate valve size is best, while higher lifts require larger valves and a specific air chamber setup. To build an efficient pump, the valve sizes and air chamber must be carefully matched to the required delivery height.

Zitieren

APA

Ghomi, M., Gayh, U., Kuhn, J., Moreno, J. E. R., Mahmoud, A. S. S., Pandya, H., Khedr, O., Chowfin, A., Amin, S., Hoffmann, G., & Panglisch, S. (2026). Evaluating volumetric efficiency in a hydraulic ram pump through component configuration. Water Practice & Technology, 21(3), 1045-1052. https://doi.org/10.2166/wpt.2026.240

Vancouver

Ghomi M, Gayh U, Kuhn J, Moreno JER, Mahmoud ASS, Pandya H, et al. Evaluating volumetric efficiency in a hydraulic ram pump through component configuration. Water Practice & Technology. 2026;21(3):1045-1052. doi:10.2166/wpt.2026.240

BibTeX
@article{Ghomi2026,
  author = {Ghomi, Mohammadreza and Gayh, Ulrike and Kuhn, Jens and Moreno, Josué Emiliano Romero and Mahmoud, Amr Samir Soliman and Pandya, Het and Khedr, Omar and Chowfin, Abhishek and Amin, Siar and Hoffmann, Grit and Panglisch, Stefan},
  title = {Evaluating volumetric efficiency in a hydraulic ram pump through component configuration},
  journal = {Water Practice & Technology},
  year = {2026},
  volume = {21},
  number = {3},
  pages = {1045--1052},
  doi = {10.2166/wpt.2026.240}
}
Kostenlos starten →