EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Estimating the percentage effects of Bemacid red dye adsorption dynamic parameters using a full factorial design approach

Fouzia Ouazani, Sofiane Guella, Yassine Khalfi, Khedidja Benouis

Water Practice & Technology · 01.03.2024 · 19 (3) · 646-656

DOI: 10.2166/wpt.2024.041 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water Practice & Technology, online erschienen am 27.02.2024. Verfasst von Fouzia Ouazani und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, we investigate the removal of Bemacid red dye using brewery waste in a packed bed column. We examined the effects of bed height, inlet flow, and inlet dye concentration on the column dynamics of adsorption. To assess the favorable column dynamics, we analyzed the breakthrough curves (BTCs). We also used the Clark, Thomas, Bed Depth Service Time (BDST), and Adams-Bohart models to determine the kinetic constants of the adsorption column from the obtained results of the dynamic studies curve of the BTCs. Analysis of the BTC studies revealed that both the BTCs time and worn-out time values increased with an increase in bed height and inlet Bemacid red dye dosage but decreased with an increase in the inlet flow rate. The results further showed that Thomas’ model was the most suitable for describing the entire BTCs (R2 > 0.93). Using a full factorial design to estimate the percentage effects of cited dynamic parameters, we found that these parameters accounted for 98% of the adsorption capacity. This methodology for estimation provides crucial information on the effects of parameters and the extent to which the adsorption capacity depends on the studied parameters.

Zitieren

APA

Ouazani, F., Guella, S., Khalfi, Y., & Benouis, K. (2024). Estimating the percentage effects of Bemacid red dye adsorption dynamic parameters using a full factorial design approach. Water Practice & Technology, 19(3), 646-656. https://doi.org/10.2166/wpt.2024.041

Vancouver

Ouazani F, Guella S, Khalfi Y, Benouis K. Estimating the percentage effects of Bemacid red dye adsorption dynamic parameters using a full factorial design approach. Water Practice & Technology. 2024;19(3):646-656. doi:10.2166/wpt.2024.041

BibTeX
@article{Ouazani2024,
  author = {Ouazani, Fouzia and Guella, Sofiane and Khalfi, Yassine and Benouis, Khedidja},
  title = {Estimating the percentage effects of Bemacid red dye adsorption dynamic parameters using a full factorial design approach},
  journal = {Water Practice & Technology},
  year = {2024},
  volume = {19},
  number = {3},
  pages = {646--656},
  doi = {10.2166/wpt.2024.041}
}
Kostenlos starten →