Modelling and optimization of energy consumption in the activated sludge biological aeration unit
Water Practice and Technology · 01.01.2023 · 18 (1) · 140-158
DOI: 10.2166/wpt.2022.154 ↗Kurz gefasst
Fachartikel in der Zeitschrift Water Practice and Technology, online erschienen am 06.12.2022. Verfasst von Mpho Muloiwa und 2 weiteren Autor:innen. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 78 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
The biological aeration unit consumes the highest energy (67.3%) in wastewater treatment compared with physical (18.8%) and chemical (13.9%) treatment processes. The high energy consumption is caused by the supply of oxygen using air pumps/blowers and temperature that controls microorganisms' growth. The purpose of this study was to model and optimize energy consumption in the biological aeration unit. The multilayer perceptron (MLP) artificial neural network (ANN) algorithm was used to model energy consumption. The particle swarm optimization (PSO) algorithm was used to optimize the energy consumption model. Sensitivity analysis was performed to determine the percentage contribution of input variables towards energy consumption. The MLP ANN algorithm modelled energy consumption successfully and produced R², RMSE, and MSE of 0.89, 0.0265, and 0.00070, respectively, during the testing phase. The PSO algorithm optimized energy consumption successfully and produced a global solution of 0.993 kWh/m³. The percentage reduction between the lowest measured and optimized energy consumption was 38.4%. Aeration period (81%) and temperature (10.7%) contributed the highest towards energy consumption. In conclusion, temperature played a significant role in energy consumption compared with airflow rate (4.2%). When the temperature is conducive to allowing the growth of microorganisms, the removal of COD and ammonia will be rapid resulting in low energy consumption.
Zitieren
APA
Muloiwa, M., Dinka, M. O., & Nyende-Byakika, S. (2023). Modelling and optimization of energy consumption in the activated sludge biological aeration unit. Water Practice and Technology, 18(1), 140-158. https://doi.org/10.2166/wpt.2022.154
Vancouver
Muloiwa M, Dinka MO, Nyende-Byakika S. Modelling and optimization of energy consumption in the activated sludge biological aeration unit. Water Practice and Technology. 2023;18(1):140-158. doi:10.2166/wpt.2022.154
BibTeX
@article{Muloiwa2023,
author = {Muloiwa, Mpho and Dinka, M. O. and Nyende-Byakika, Stephen},
title = {Modelling and optimization of energy consumption in the activated sludge biological aeration unit},
journal = {Water Practice and Technology},
year = {2023},
volume = {18},
number = {1},
pages = {140--158},
doi = {10.2166/wpt.2022.154}
}
EUVIMED