EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Life Cycle Impact Assessment for Steel Slag Aggregates Production in Abu Dhabi, United Arab Emirates

Mohammed H. Alzard, Omar Najm, Ahmed Hamdan, Maris Sinka

Environmental Science & Sustainable Development · 30.06.2026 · 11 (1) · 130-142

DOI: 10.21625/essd.v11i1.1304 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Environmental Science & Sustainable Development, online erschienen am 30.06.2026. Verfasst von Mohammed H. Alzard und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Steel slag aggregates (SSA) offer a potential route for reducing reliance on natural aggregates (NA) and diverting steelmaking by-products from landfill. However, facility-specific life cycle data for SSA production in Abu Dhabi, United Arab Emirates, remain limited. This study quantifies the cradle-to-gate greenhouse gas footprint of SSA produced at two recycling facilities in Abu Dhabi. The assessment follows ISO 14040/14044 and uses a functional unit of 1 tonne of SSA. Primary 2024 operational data were combined with emission factors from the UK Government 2024 dataset, Intergovernmental Panel on Climate Change default values, and published literature. The combined emissions for 500,000 tonnes of SSA were 3,270.22 t CO2eq, corresponding to an average intensity of 6.54 kg CO2eq/tonne SSA. Al Fayah emitted 2,007.88 t CO2eq for 250,000 tonnes of output, equivalent to 8.03 kg CO2eq/tonne SSA, while KEZAD B emitted 1,262.33 t CO2eq for 250,000 tonnes of output, equivalent to 5.05 kg CO2eq/tonne SSA. Inbound material transportation dominated the footprint at both plants, particularly last-mile road transport. Compared with the NA benchmark of 7.75 kg CO2eq/tonne, the average SSA intensity was approximately 16% lower. Under the stated boundary and assumptions, SSA showed lower cradle-to-gate emissions than NA. The way forward should prioritize primary metering, carrier data, and the development of a third-party-verified Environmental Product Declaration to strengthen comparability and market uptake.

Zitieren

APA

Alzard, M. H., Najm, O., Hamdan, A., & Sinka, M. (2026). Life Cycle Impact Assessment for Steel Slag Aggregates Production in Abu Dhabi, United Arab Emirates. Environmental Science & Sustainable Development, 11(1), 130-142. https://doi.org/10.21625/essd.v11i1.1304

Vancouver

Alzard MH, Najm O, Hamdan A, Sinka M. Life Cycle Impact Assessment for Steel Slag Aggregates Production in Abu Dhabi, United Arab Emirates. Environmental Science & Sustainable Development. 2026;11(1):130-142. doi:10.21625/essd.v11i1.1304

BibTeX
@article{Alzard2026,
  author = {Alzard, Mohammed H. and Najm, Omar and Hamdan, Ahmed and Sinka, Maris},
  title = {Life Cycle Impact Assessment for Steel Slag Aggregates Production in Abu Dhabi, United Arab Emirates},
  journal = {Environmental Science & Sustainable Development},
  year = {2026},
  volume = {11},
  number = {1},
  pages = {130--142},
  doi = {10.21625/essd.v11i1.1304}
}
Kostenlos starten →