Dimensionless modeling and experimental validation of stick-slip locomotion in a semidefinite vibration-driven system
Vibroengineering Procedia · 01.11.2026 · 64 · 81-90
DOI: 10.21595/vp.2026.26989 ↗Kurz gefasst
Fachartikel in der Zeitschrift Vibroengineering Procedia, online erschienen am 01.11.2026. Verfasst von Vitaliy Korendiy und 5 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Rectilinear locomotion of a semidefinite vibration-driven system on an inclined surface is studied using a one-coordinate stick-slip model and a physical prototype. The chassis and rotating assembly are treated as separate rigid bodies. General force balances retain angular-acceleration terms, and the rotor equation defines the instantaneous torque required for constant speed. A third balance resolves the two longitudinal support reactions. The reported prototype geometry and corrected mass properties yield a conservative lower bound of 0.130 N for each support-pair reaction over the investigated frequency and inclination ranges at nominal friction, conditional on the prescribed-speed planar model. The equations are transformed using the unbalance mass ratio Π m , frequency parameter Π ω , friction coefficients μ s and μ k , inclination angle α , and the excitation-to-weight ratio Γ . Explicit validity conditions are established for continuous contact and bounded downhill motion, and an analytical condition for forward frictional breakaway is derived. Numerical integration uses an explicit stick-slip state-switching algorithm with transient removal and step-size verification. The frequency- and inclination-dependent predictions are compared with the experimental markers obtained for a prototype driven by a 3650-type DC vibration motor and instrumented with two WitMotion BWT901CL inertial units. The experimentally obtained points give a combined dimensionless-velocity RMSE of 0.00091 and a maximum absolute discrepancy of 0.00266. The resulting model is intended for continuous-contact, predominantly translational regimes and provides dimensionless criteria for selecting excitation and friction parameters.
Zitieren
APA
Korendiy, V., Zelinskyi, M. P., Predko, R., Litvin, R., Porokhovskyi, Y., & Zakharchuk, M. (2026). Dimensionless modeling and experimental validation of stick-slip locomotion in a semidefinite vibration-driven system. Vibroengineering Procedia, 64, 81-90. https://doi.org/10.21595/vp.2026.26989
Vancouver
Korendiy V, Zelinskyi MP, Predko R, Litvin R, Porokhovskyi Y, Zakharchuk M. Dimensionless modeling and experimental validation of stick-slip locomotion in a semidefinite vibration-driven system. Vibroengineering Procedia. 2026;64:81-90. doi:10.21595/vp.2026.26989
BibTeX
@article{Korendiy2026,
author = {Korendiy, Vitaliy and Zelinskyi, Maksym Pavlo and Predko, Rostyslav and Litvin, Roman and Porokhovskyi, Yurii and Zakharchuk, Maryana},
title = {Dimensionless modeling and experimental validation of stick-slip locomotion in a semidefinite vibration-driven system},
journal = {Vibroengineering Procedia},
year = {2026},
volume = {64},
pages = {81--90},
doi = {10.21595/vp.2026.26989}
}
EUVIMED