EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mathematical modeling of regime-dependent thermal response in multilayer wall assemblies with equal total steady thermal resistance

Dmytro Usenko, Valery Usenko, Iryna Usenko

Vibroengineering Procedia · 01.11.2026 · 64 · 294-300

DOI: 10.21595/vp.2026.26860 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Vibroengineering Procedia, online erschienen am 01.11.2026. Verfasst von Dmytro Usenko und 2 weiteren Autor:innen. Die Arbeit nennt 10 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Steady thermal resistance is a fundamental characteristic of building-envelope assemblies; however, equal steady resistance does not uniquely determine their transient thermal behavior. This study aims to numerically separate the effects of layer order, temperature-dependent thermophysical properties, and redistribution of thermal resistance between bulk and interfacial components in stationarily equivalent multilayer wall assemblies subjected to periodic and finite-pulse thermal loading. A one-dimensional transient heat-conduction model with Robin boundary conditions, finite interfacial thermal resistance, and source-supported temperature-dependent material properties was employed. All compared configurations were constrained to the same total steady thermal resistance at the reference temperature, R t o t = 3.65315 m 2 K\/W. The numerical implementation passed the adopted verification procedure with restrictions. The combined grid/time uncertainty was 0.325 %, below the prescribed 0.5 % acceptance criterion. For the tested pair differing only in layer order, the relative effect was –0.905 % for the periodic decrement factor and +0.566 % for the finite-pulse peak transmission ratio, with effect-to-uncertainty ratios of 79.2 and 88.9, respectively; the opposite signs therefore refer to two distinct regime-specific metrics. The temperature-dependent configuration produced a numerically resolved periodic effect of –2.005 %, whereas the corresponding pulse effect of –0.282 % remained below the adopted numerical-resolution threshold. For a compensated 5-10 % redistribution of bulk thermal resistance to interfacial contacts, the additional dynamic effect was likewise unresolved. The results demonstrate the value of controlled factor separation combined with explicit numerical-uncertainty assessment when evaluating transient thermal behavior.

Zitieren

APA

Usenko, D., Usenko, V., & Usenko, I. (2026). Mathematical modeling of regime-dependent thermal response in multilayer wall assemblies with equal total steady thermal resistance. Vibroengineering Procedia, 64, 294-300. https://doi.org/10.21595/vp.2026.26860

Vancouver

Usenko D, Usenko V, Usenko I. Mathematical modeling of regime-dependent thermal response in multilayer wall assemblies with equal total steady thermal resistance. Vibroengineering Procedia. 2026;64:294-300. doi:10.21595/vp.2026.26860

BibTeX
@article{Usenko2026,
  author = {Usenko, Dmytro and Usenko, Valery and Usenko, Iryna},
  title = {Mathematical modeling of regime-dependent thermal response in multilayer wall assemblies with equal total steady thermal resistance},
  journal = {Vibroengineering Procedia},
  year = {2026},
  volume = {64},
  pages = {294--300},
  doi = {10.21595/vp.2026.26860}
}
Kostenlos starten →