EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Kinematic analysis and slip-roll ratio quantification for conductive roll-ring flexible rings

Junye Li, Hongxu Tian, Zengwei Zhou, Jun Zhang, Liang Xu, Pingping Wei

Vibroengineering Procedia · 01.11.2026 · 64 · 373-377

DOI: 10.21595/vp.2026.26805 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Vibroengineering Procedia, online erschienen am 01.11.2026. Verfasst von Junye Li und 5 weiteren Autor:innen. Die Arbeit nennt 11 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conductive rolling rings utilize a rolling electrical contact mechanism for power and signal transmission, effectively mitigating friction, enhancing transmission efficiency, and extending service life compared to traditional sliding rings. This study investigates the kinematics of the flexible ring using the simulation method. By analyzing velocity contour plot and decomposing velocity vectors, the superposition characteristics of the ring's spin-orbit coupled motion are elucidated. Simulation results indicate that the linear velocity peaks at 363 mm/s at the inner ring interface and approaches zero at the outer ring. Furthermore, the slide-to-roll ratio was calculated to quantify rolling performance. Across deformation levels ranging from 0.3 mm to 0.7 mm, the SRR remains exceptionally low (0.0008-0.0033). This confirms minimal relative slip at the contact interface, demonstrating an ideal pure rolling friction state. These findings provide a reliable theoretical and simulation basis for structural optimization, friction pair matching, and practical applications of conductive rolling rings.

Zitieren

APA

Li, J., Tian, H., Zhou, Z., Zhang, J., Xu, L., & Wei, P. (2026). Kinematic analysis and slip-roll ratio quantification for conductive roll-ring flexible rings. Vibroengineering Procedia, 64, 373-377. https://doi.org/10.21595/vp.2026.26805

Vancouver

Li J, Tian H, Zhou Z, Zhang J, Xu L, Wei P. Kinematic analysis and slip-roll ratio quantification for conductive roll-ring flexible rings. Vibroengineering Procedia. 2026;64:373-377. doi:10.21595/vp.2026.26805

BibTeX
@article{Li2026,
  author = {Li, Junye and Tian, Hongxu and Zhou, Zengwei and Zhang, Jun and Xu, Liang and Wei, Pingping},
  title = {Kinematic analysis and slip-roll ratio quantification for conductive roll-ring flexible rings},
  journal = {Vibroengineering Procedia},
  year = {2026},
  volume = {64},
  pages = {373--377},
  doi = {10.21595/vp.2026.26805}
}
Kostenlos starten →