EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of flexible ring width on motion trajectory and bending stress in power rolling rings

Junye Li, Chao Wei, Gaopeng Shuai, Chuanfeng Wang, Nianhuan Li, Guodong Ni

Vibroengineering Procedia · 01.11.2026 · 64 · 367-372

DOI: 10.21595/vp.2026.26804 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Vibroengineering Procedia, online erschienen am 01.11.2026. Verfasst von Junye Li und 5 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, an overall simulation model of the power rolling ring, consisting of an outer conductive ring, an inner conductive ring, and a flexible ring, is established using simulation software. A normal refined free quadrilateral mesh is applied to the inner and outer conductive rings, while a finer mesh of the same type is applied to the flexible ring. In the model, H62 brass is selected as the material for the inner and outer conductive rings, and C17200 beryllium bronze is used for the flexible ring. Transient analysis is conducted by defining the rotational speed of the inner conductive ring, the identity boundary pairs at the contact interfaces, and the friction coefficient. The study focuses on investigating the motion trajectory of the power rolling ring and the stress distribution characteristics of the flexible ring under varying widths of 0.6 mm, 0.8 mm, 1 mm, and 1.2 mm. The results indicate that the maximum stress on the flexible ring occurs at its contact positions with the inner and outer conductive rings; furthermore, as the width increases, the maximum stress at the contact points exhibits a trend of initially decreasing and then increasing, and the overall structural motion trajectory of the model proves to be reasonable. This research provides a solid theoretical foundation and an effective methodology for the structural optimization and performance evaluation of power rolling rings.

Zitieren

APA

Li, J., Wei, C., Shuai, G., Wang, C., Li, N., & Ni, G. (2026). Effect of flexible ring width on motion trajectory and bending stress in power rolling rings. Vibroengineering Procedia, 64, 367-372. https://doi.org/10.21595/vp.2026.26804

Vancouver

Li J, Wei C, Shuai G, Wang C, Li N, Ni G. Effect of flexible ring width on motion trajectory and bending stress in power rolling rings. Vibroengineering Procedia. 2026;64:367-372. doi:10.21595/vp.2026.26804

BibTeX
@article{Li2026,
  author = {Li, Junye and Wei, Chao and Shuai, Gaopeng and Wang, Chuanfeng and Li, Nianhuan and Ni, Guodong},
  title = {Effect of flexible ring width on motion trajectory and bending stress in power rolling rings},
  journal = {Vibroengineering Procedia},
  year = {2026},
  volume = {64},
  pages = {367--372},
  doi = {10.21595/vp.2026.26804}
}
Kostenlos starten →