EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Parametric optimization and mathematical modeling of tantalum oxide modified Al-Si alloy hardness

Sarvar Tursunbaev, Zokirjon Nurdinov, Javlon Bekpulatov, Fatxulla Abdullaev, Lazizbek Raufov, Nuritdin Tadjiev, Nargiza Nazarova, Kamola Tashxodjayeva

Vibroengineering Procedia · 01.11.2026 · 64 · 272-278

DOI: 10.21595/vp.2026.26695 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Vibroengineering Procedia, online erschienen am 01.11.2026. Verfasst von Sarvar Tursunbaev und 7 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article investigates the effect of tantalum oxide (Ta 2 O 5 ) modification on the hardness properties of aluminum-silicon (Al-Si) alloys through mathematical modeling and parametric evaluation. During the experimental studies, the influence of varying amounts of tantalum oxide particles on the mechanical properties-particularly hardness-was examined, and the relationship between them was clarified based on experimental results. The findings indicate that the addition of tantalum oxide has a significant impact on the hardness of the alloy. The modifier was introduced into the samples in specially wrapped form, and the samples were cast into sand–clay molds. Within a certain optimal concentration range, the hardness reaches its maximum value, which can be explained by microstructural refinement and improved phase distribution. However, when the amount of additive exceeds this optimal level, a slight decrease in hardness is observed due to particle agglomeration and segregation in the samples. Based on the research results, a mathematical model describing the relationship between tantalum oxide content and hardness was developed. This model shows good agreement with experimental data and can be effectively used as a tool for selecting the optimal composition of Al–Si alloys and predicting their mechanical properties.

Zitieren

APA

Tursunbaev, S., Nurdinov, Z., Bekpulatov, J., Abdullaev, F., Raufov, L., Tadjiev, N., Nazarova, N., & Tashxodjayeva, K. (2026). Parametric optimization and mathematical modeling of tantalum oxide modified Al-Si alloy hardness. Vibroengineering Procedia, 64, 272-278. https://doi.org/10.21595/vp.2026.26695

Vancouver

Tursunbaev S, Nurdinov Z, Bekpulatov J, Abdullaev F, Raufov L, Tadjiev N, et al. Parametric optimization and mathematical modeling of tantalum oxide modified Al-Si alloy hardness. Vibroengineering Procedia. 2026;64:272-278. doi:10.21595/vp.2026.26695

BibTeX
@article{Tursunbaev2026,
  author = {Tursunbaev, Sarvar and Nurdinov, Zokirjon and Bekpulatov, Javlon and Abdullaev, Fatxulla and Raufov, Lazizbek and Tadjiev, Nuritdin and Nazarova, Nargiza and Tashxodjayeva, Kamola},
  title = {Parametric optimization and mathematical modeling of tantalum oxide modified Al-Si alloy hardness},
  journal = {Vibroengineering Procedia},
  year = {2026},
  volume = {64},
  pages = {272--278},
  doi = {10.21595/vp.2026.26695}
}
Kostenlos starten →