EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of the properties of composite binders for cement mortar

Urinbek Turgunbayev, Jumagul Turgunbayeva, Ziyovuddin Rakhimjonov, Jamshid Khudoyberdiyev

Vibroengineering Procedia · 01.11.2026 · 64 · 250-257

DOI: 10.21595/vp.2026.26399 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Vibroengineering Procedia, online erschienen am 01.11.2026. Verfasst von Urinbek Turgunbayev und 3 weiteren Autor:innen. Die Arbeit nennt 10 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the rheological, structural-mechanical, and strength properties of composite cement-based binders containing finely dispersed mineral fillers, including limestone, zeolite-containing rock, and microsilica. The effects of cement content in the range of 10–50% on water demand, yield stress, setting time, and 28-day compressive strength were experimentally evaluated at comparable mixture plasticity. The results showed that water demand strongly depended on the type of mineral filler, with microsilica-containing compositions requiring the highest water-to-solid ratios and limestone-containing compositions the lowest. Increasing the cement content reduced the water-to-solid ratio, decreased yield stress, and accelerated both initial and final setting. The yield stress–cement content relationships were satisfactorily described by exponential regression models, with coefficients of determination of 0.971-0.998. At comparable plasticity, the 28-day compressive strength ranged from 7.4 to 48.6 MPa, with the highest values obtained for limestone-containing compositions, followed by zeolite-containing and microsilica-containing compositions. Linear regression models were used for preliminary selection of cement content to achieve a target compressive strength. For a target strength of 25 MPa, the calculated cement contents were approximately 26.3 %, 29.8 %, and 46.5 % for limestone-, zeolite-, and microsilica-containing binders, respectively. The results provide a basis for rational selection of composite binder compositions for masonry and plaster mortars using local mineral raw materials.

Zitieren

APA

Turgunbayev, U., Turgunbayeva, J., Rakhimjonov, Z., & Khudoyberdiyev, J. (2026). Investigation of the properties of composite binders for cement mortar. Vibroengineering Procedia, 64, 250-257. https://doi.org/10.21595/vp.2026.26399

Vancouver

Turgunbayev U, Turgunbayeva J, Rakhimjonov Z, Khudoyberdiyev J. Investigation of the properties of composite binders for cement mortar. Vibroengineering Procedia. 2026;64:250-257. doi:10.21595/vp.2026.26399

BibTeX
@article{Turgunbayev2026,
  author = {Turgunbayev, Urinbek and Turgunbayeva, Jumagul and Rakhimjonov, Ziyovuddin and Khudoyberdiyev, Jamshid},
  title = {Investigation of the properties of composite binders for cement mortar},
  journal = {Vibroengineering Procedia},
  year = {2026},
  volume = {64},
  pages = {250--257},
  doi = {10.21595/vp.2026.26399}
}
Kostenlos starten →