EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mathematical modeling of the operation of a resonant vibration stand with an inertial exciter and hydraulic coupling for testing aviation industry products

Roman Kapalo, Oleksii Lanets, Pavlo Maistruk, Andrii Voitovich, Ihor Nazar, Ivan Khomych

Vibroengineering Procedia · 30.09.2025 · 59 · 28-33

DOI: 10.21595/vp.2025.25059 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Vibroengineering Procedia, online erschienen am 30.09.2025. Verfasst von Roman Kapalo und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 10 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The article presents a mathematical model of a resonant two-mass vibration stand with an inertial exciter, driven by an asynchronous electric motor through a hydraulic coupling. The necessary parameters of the mechanical vibration system and drive are substantiated. The design feature of the vibration stand is as follows: the drive shaft of the hydraulic coupling is driven by an electric motor, and the driven shaft of the hydraulic coupling is connected to the unbalanced mass. The work simulates a vibration stand. As a result of mathematical modeling, it was established that the rotor of the electric motor reaches the nominal operating modes, and the unbalanced mass speed “hangs” in the vicinity of the resonant peak due to processes associated with the Sommerfeld effect. This allowed for the automatic “fixing” of the frequency of forced oscillations with close pre-resonance tuning, providing energy-saving operating modes in the vibration stand. Expensive control systems are not required.

Zitieren

APA

Kapalo, R., Lanets, O., Maistruk, P., Voitovich, A., Nazar, I., & Khomych, I. (2025). Mathematical modeling of the operation of a resonant vibration stand with an inertial exciter and hydraulic coupling for testing aviation industry products. Vibroengineering Procedia, 59, 28-33. https://doi.org/10.21595/vp.2025.25059

Vancouver

Kapalo R, Lanets O, Maistruk P, Voitovich A, Nazar I, Khomych I. Mathematical modeling of the operation of a resonant vibration stand with an inertial exciter and hydraulic coupling for testing aviation industry products. Vibroengineering Procedia. 2025;59:28-33. doi:10.21595/vp.2025.25059

BibTeX
@article{Kapalo2025,
  author = {Kapalo, Roman and Lanets, Oleksii and Maistruk, Pavlo and Voitovich, Andrii and Nazar, Ihor and Khomych, Ivan},
  title = {Mathematical modeling of the operation of a resonant vibration stand with an inertial exciter and hydraulic coupling for testing aviation industry products},
  journal = {Vibroengineering Procedia},
  year = {2025},
  volume = {59},
  pages = {28--33},
  doi = {10.21595/vp.2025.25059}
}
Kostenlos starten →