EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of failure criteria for residual tensile strength of composite laminates with circular holes

Botao Hu, Xiangming Chen, Fanchen Deng, Xiaobo Sun

Vibroengineering Procedia · 18.05.2023 · 49 · 212-219

DOI: 10.21595/vp.2023.23348 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Vibroengineering Procedia, online erschienen am 18.05.2023. Verfasst von Botao Hu und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To evaluate the effect of circular holes on the mechanical properties of laminated composite plates with different sizes, static tensile destructive tests were carried out on four different types of composite laminated plates with different layups and aperture sizes. The experimental results showed that for the four types of layup, the strength of the specimens with a diameter of 6.35 mm decreased by 44.3 %, 51.3 %, 48.0 %, and 39.4 % compared to intact specimens, and the greater the proportion of 0° layup, the greater the strength decrease of the perforated specimens. Under the same layup, as the diameter of the circular hole increased, the tensile strength decreased rapidly with the constant ratio of diameter to width. Based on the experimental results, three commonly used models for predicting the residual strength of perforated laminated composite plates, including point stress criterion, average stress criterion, and stress field intensity method, were evaluated. The results showed that the average stress criterion had higher accuracy compared to the point stress criterion and the stress field intensity method.

Zitieren

APA

Hu, B., Chen, X., Deng, F., & Sun, X. (2023). Evaluation of failure criteria for residual tensile strength of composite laminates with circular holes. Vibroengineering Procedia, 49, 212-219. https://doi.org/10.21595/vp.2023.23348

Vancouver

Hu B, Chen X, Deng F, Sun X. Evaluation of failure criteria for residual tensile strength of composite laminates with circular holes. Vibroengineering Procedia. 2023;49:212-219. doi:10.21595/vp.2023.23348

BibTeX
@article{Hu2023,
  author = {Hu, Botao and Chen, Xiangming and Deng, Fanchen and Sun, Xiaobo},
  title = {Evaluation of failure criteria for residual tensile strength of composite laminates with circular holes},
  journal = {Vibroengineering Procedia},
  year = {2023},
  volume = {49},
  pages = {212--219},
  doi = {10.21595/vp.2023.23348}
}
Kostenlos starten →