EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Highway noise suppression based on LSTM-PPO joint training and localization of sound source model

Yi Zhang, Jiani Zhang, Chenpeng Shi, Ning Chen, Fang Zong

Journal of Vibroengineering · 20.11.2026

DOI: 10.21595/jve.2026.26334 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Vibroengineering, online erschienen am 20.11.2026. Verfasst von Yi Zhang und 4 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Currently, in the field of highway noise suppression, the existing mainstream sound source localization and noise reduction technologies suffer from insufficient coordination between localization and noise reduction, large signal-to-noise-ratio (SNR) localization errors, inadequate noise attenuation, high signal distortion rates, and poor robustness, making it difficult to adapt to vehicle speed fluctuations in the range of 60-120 km/h. To address these issues, this study applies long short-term memory (LSTM) and proximal policy optimization (PPO) joint training to highway noise suppression, constructing an integrated framework of “feature extraction, sound source localization, and adaptive noise reduction.” The LSTM gating structure is innovatively improved, and residual connections are introduced to alleviate gradient saturation. A feature fusion loss function is then designed to achieve deep synergy between the two components, and the PPO composite reward function is optimized to meet the requirements of low- and medium-frequency noise suppression. This technology effectively enhances the synergistic performance of localization and noise reduction, overcoming the bottlenecks of existing approaches. Simulation results indicate that the localization accuracy reaches 95.6±0.7 %, with the localization error controlled below 3°. The noise reduction attains 32.1±0.4 dB, accompanied by a signal distortion of only 4.2±0.2 %. Additionally, the robustness and practicability evaluation coefficients are 0.91±0.02 and 82.6±0.7, respectively. Compared with recent comparative technologies (e.g., LSTM-TD3, LSTM-GAN) published after 2023, the comprehensive performance is improved by more than 24.8 %. This study fills the gap in deep joint training technology for highway noise suppression and provides reliable technical support for low- and medium-frequency noise suppression in complex scenes. Therefore, it holds significant engineering application value and research importance.

Zitieren

APA

Zhang, Y., Zhang, J., Shi, C., Chen, N., & Zong, F. (2026). Highway noise suppression based on LSTM-PPO joint training and localization of sound source model. Journal of Vibroengineering. https://doi.org/10.21595/jve.2026.26334

Vancouver

Zhang Y, Zhang J, Shi C, Chen N, Zong F. Highway noise suppression based on LSTM-PPO joint training and localization of sound source model. Journal of Vibroengineering. 2026. doi:10.21595/jve.2026.26334

BibTeX
@article{Zhang2026,
  author = {Zhang, Yi and Zhang, Jiani and Shi, Chenpeng and Chen, Ning and Zong, Fang},
  title = {Highway noise suppression based on LSTM-PPO joint training and localization of sound source model},
  journal = {Journal of Vibroengineering},
  year = {2026},
  doi = {10.21595/jve.2026.26334}
}
Kostenlos starten →