EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prediction and experimental validation of radial displacement in combined bearings for borehole trajectory control tools

Peng Gao Guo, Lei Shi, Yan Fei Yu, Zhan Zhou, Dian Ren Mao

Journal of Vibroengineering · 15.08.2026 · 28 (5) · 1176-1189

DOI: 10.21595/jve.2026.25181 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Vibroengineering, online erschienen am 04.06.2026. Verfasst von Peng Gao Guo und 4 weiteren Autor:innen. Die Arbeit nennt 13 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the decreasing of easy-to-exploit oil and gas resources, complex structure wells put forward higher requirements for wellbore trajectory control accuracy. As the core supporting part of the guiding tool, the radial displacement of the combined bearing directly affects the deflection accuracy of the spindle. In order to reveal the internal correlation mechanism between the radial displacement of the combined bearing and the accuracy of the spindle deflection control, this paper combines the statically indeterminate beam theory and the parametric finite element method to establish a spindle deflection prediction model considering multi-factor coupling. The influence of radial load, rotational speed and inner and outer ring eccentricity on the radial displacement of the combined bearing is systematically studied. The results show that the radial displacement of the combined bearing increases significantly with the increase of radial load, rotational speed and eccentricity. Especially under heavy load conditions, the change of the contact logarithm of the rollers inside the bearing leads to a nonlinear turning of the stiffness characteristics, showing obvious adaptive bearing characteristics. The prototype experiment shows that the variation trend of the simulation and the measured data is highly consistent under the condition of 30 r/min, and the error is controlled within 10 %-15 %, which verifies the accuracy of the model. This study not only quantifies the influence of key parameters on bearing displacement, but also provides a theoretical basis and parameter selection criteria for structural optimization design and accuracy improvement of rotary steering drilling tool combined bearings.

Zitieren

APA

Guo, P. G., Shi, L., Yu, Y. F., Zhou, Z., & Mao, D. R. (2026). Prediction and experimental validation of radial displacement in combined bearings for borehole trajectory control tools. Journal of Vibroengineering, 28(5), 1176-1189. https://doi.org/10.21595/jve.2026.25181

Vancouver

Guo PG, Shi L, Yu YF, Zhou Z, Mao DR. Prediction and experimental validation of radial displacement in combined bearings for borehole trajectory control tools. Journal of Vibroengineering. 2026;28(5):1176-1189. doi:10.21595/jve.2026.25181

BibTeX
@article{Guo2026,
  author = {Guo, Peng Gao and Shi, Lei and Yu, Yan Fei and Zhou, Zhan and Mao, Dian Ren},
  title = {Prediction and experimental validation of radial displacement in combined bearings for borehole trajectory control tools},
  journal = {Journal of Vibroengineering},
  year = {2026},
  volume = {28},
  number = {5},
  pages = {1176--1189},
  doi = {10.21595/jve.2026.25181}
}
Kostenlos starten →