EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Lightweight design of double-head machine tool beam based on the adaptive multi-objective method

Bingjie Zhong, Chang Lin, Zhijie Huang, Tianhua Lin

Journal of Vibroengineering · 31.03.2025 · 27 (2) · 377-389

DOI: 10.21595/jve.2025.24641 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Vibroengineering, online erschienen am 23.01.2025. Verfasst von Bingjie Zhong und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Double-head machine tool has the advantages of high efficiency and high degree of automation. In order to reduce the weight of double-head machine tool and improve the stiffness of the entire machine. An optimization design method combining topology optimization, sensitivity analysis and adaptive multi-objective method is used. Firstly, simplify the model in SolidWorks and import it into ANSYS Workbench software to carry out finite element analysis on the entire double-head machine tool to find out the weak component as the beam. Afterwards, carry out topological optimization on the beam and redesign the beam structure, and complete the first optimization. Then, through sensitivity analysis of the input parameters, key parameters that significantly impact the objective function are identified. Subsequently, a multi-objective optimization function is constructed for these key parameters and the objective function. Finally, an adaptive multi-objective method is used to solve the problem and obtain a Pareto optimal solution set, completing the second optimization. The results show that the weight of the beam is reduced by 8.88 %, the deformation of the beam is reduced by 11.29 %, and the equivalent stress of the entire machine is reduced by 28.33 %. This design not only yields significant economic benefits but also serves as a valuable reference for the lightweight design of large machine tool crossbeams.

Zitieren

APA

Zhong, B., Lin, C., Huang, Z., & Lin, T. (2025). Lightweight design of double-head machine tool beam based on the adaptive multi-objective method. Journal of Vibroengineering, 27(2), 377-389. https://doi.org/10.21595/jve.2025.24641

Vancouver

Zhong B, Lin C, Huang Z, Lin T. Lightweight design of double-head machine tool beam based on the adaptive multi-objective method. Journal of Vibroengineering. 2025;27(2):377-389. doi:10.21595/jve.2025.24641

BibTeX
@article{Zhong2025,
  author = {Zhong, Bingjie and Lin, Chang and Huang, Zhijie and Lin, Tianhua},
  title = {Lightweight design of double-head machine tool beam based on the adaptive multi-objective method},
  journal = {Journal of Vibroengineering},
  year = {2025},
  volume = {27},
  number = {2},
  pages = {377--389},
  doi = {10.21595/jve.2025.24641}
}
Kostenlos starten →