Comparison of different experimental methods for measuring droplet size in inkjet printing
Journal of Measurements in Engineering · 31.12.2025 · 13 (4) · 888-900
DOI: 10.21595/jme.2025.24880 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Measurements in Engineering, online erschienen am 27.07.2025. Verfasst von Yuehua Hu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In the inkjet printing process, controlling the droplet size is essential to ensure uniform thin film, a critical factor for achieving high performance of electronic devices. In this study, we evaluate the accuracy and applicability of three droplet measurement methods using inks with different properties. The first method is the laser diffraction method, which measures individual droplets based on the Fraunhofer diffraction in real time. The second is the mass measurement method, which calculates the droplet mass using a microbalance and employs evaporation compensation to minimize evaporation effects, and the third method is the shadow imaging method, a widely adopted commercial technique based on the international standard. To evaluate the accuracy of these measurement methods with three inks having various boiling points (BP), laser diffraction serves as a benchmark here to compare the results of the shadow image and mass measurement methods. Laser diffraction was selected because it shows better coefficient of variation about 1.7 % than the coefficient of variation of mass measurement and shadow imaging methods about 8.7 % and 6.4 %, respectively. The BP of the ink and measurement precision based on laser diffraction results were proportional to each other. These insights guide the selection of optimal measurement method for inkjet printing applications with printed electronic inks. When printed electronic inks with various boiling points were used, the laser diffraction method consistently demonstrated better measurement errors in droplet size than the mass measurement and the shadow imaging method.
Zitieren
APA
Hu, Y., Shin, D. Y., Moon, Y. J., Kim, J., & Kang, K. (2025). Comparison of different experimental methods for measuring droplet size in inkjet printing. Journal of Measurements in Engineering, 13(4), 888-900. https://doi.org/10.21595/jme.2025.24880
Vancouver
Hu Y, Shin DY, Moon YJ, Kim J, Kang K. Comparison of different experimental methods for measuring droplet size in inkjet printing. Journal of Measurements in Engineering. 2025;13(4):888-900. doi:10.21595/jme.2025.24880
BibTeX
@article{Hu2025,
author = {Hu, Yuehua and Shin, Dong Yeol and Moon, Yoon Jae and Kim, Jaekyun and Kang, Kyung-Tae},
title = {Comparison of different experimental methods for measuring droplet size in inkjet printing},
journal = {Journal of Measurements in Engineering},
year = {2025},
volume = {13},
number = {4},
pages = {888--900},
doi = {10.21595/jme.2025.24880}
}
EUVIMED