Measuring of rotating shafts angular deformation by means of ultrasonic vibration meter
Journal of Measurements in Engineering · 31.03.2023 · 11 (1) · 51-61
DOI: 10.21595/jme.2022.22919 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Measurements in Engineering, online erschienen am 18.12.2022. Verfasst von Artem Ermolaev und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The task of measuring of rotating shafts angular deformation by means of ultrasonic vibration meter is considered in the article. Measurement of vibration parameters of rotating objects is an urgent task in the technical diagnostics of electromechanical units, turbines, drilling rigs and metal-cutting machines subject to vibration disturbances. The measured vibration parameters of rotating shafts include their angular deformation and torques arising from torsional vibrations of shafting of machines in the stationary and mobile objects. Timely monitoring of the torsional vibrations of the shafting and other factors of vibration disturbances by the frequency of shaft beats makes it possible to identify defects at an early stage and eliminate breakdowns that threaten the life and safety of personnel. It was found out that the reflected acoustic signal phase measurement relative to the reference one incident onto the investigated shaft surface can be carried out with error at 0.6 % at velocities not more than 0.5 m/s. This article is intended for mechanical engineers involved in the development and operation of rotating machines of stationary and mobile objects.
Zitieren
APA
Ermolaev, A., Gordeev, B., Okhulkov, S., Panovko, G., & Plekhov, A. (2023). Measuring of rotating shafts angular deformation by means of ultrasonic vibration meter. Journal of Measurements in Engineering, 11(1), 51-61. https://doi.org/10.21595/jme.2022.22919
Vancouver
Ermolaev A, Gordeev B, Okhulkov S, Panovko G, Plekhov A. Measuring of rotating shafts angular deformation by means of ultrasonic vibration meter. Journal of Measurements in Engineering. 2023;11(1):51-61. doi:10.21595/jme.2022.22919
BibTeX
@article{Ermolaev2023,
author = {Ermolaev, Artem and Gordeev, Boris and Okhulkov, Sergei and Panovko, Grigory and Plekhov, Alexander},
title = {Measuring of rotating shafts angular deformation by means of ultrasonic vibration meter},
journal = {Journal of Measurements in Engineering},
year = {2023},
volume = {11},
number = {1},
pages = {51--61},
doi = {10.21595/jme.2022.22919}
}
EUVIMED