EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The machining noise control of large size extruded aluminum utilized in high-speed trains

D. P. Yang, Q. F. Wang, H. C. Zhang, H. W. Sun, T. Feng, H. Y. Xu, X. H. Zhou

Journal of Measurements in Engineering · 31.03.2016 · 4 (1) · 1-6

DOI: 10.21595/jme.2016.16587 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Measurements in Engineering, online erschienen am 31.03.2016. Verfasst von D. P. Yang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 9 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The noise level was assessed by measuring and processing the sound pressure during the mechanical treatment of large size aluminum extrusions utilized in high-speed trains. The noise control tests were proposed by various machining technologies including the adjustments of cutter tool, machining feed rate, cutting way and sealing the openings with sound-absorbing material or not. The results indicated that obvious noise suppression can be obtained by using monolithic cutters, and sealing the openings and ports with sound-absorbing materials, which has little effect on the whole machining efficiency. It is helpful for noise reduction using the machining technologies of cutting along milling and slowing the feed rate down, which requires a balance between noise level and machining efficiency.

Zitieren

APA

Yang, D. P., Wang, Q. F., Zhang, H. C., Sun, H. W., Feng, T., Xu, H. Y., & Zhou, X. H. (2016). The machining noise control of large size extruded aluminum utilized in high-speed trains. Journal of Measurements in Engineering, 4(1), 1-6. https://doi.org/10.21595/jme.2016.16587

Vancouver

Yang DP, Wang QF, Zhang HC, Sun HW, Feng T, Xu HY, et al. The machining noise control of large size extruded aluminum utilized in high-speed trains. Journal of Measurements in Engineering. 2016;4(1):1-6. doi:10.21595/jme.2016.16587

BibTeX
@article{Yang2016,
  author = {Yang, D. P. and Wang, Q. F. and Zhang, H. C. and Sun, H. W. and Feng, T. and Xu, H. Y. and Zhou, X. H.},
  title = {The machining noise control of large size extruded aluminum utilized in high-speed trains},
  journal = {Journal of Measurements in Engineering},
  year = {2016},
  volume = {4},
  number = {1},
  pages = {1--6},
  doi = {10.21595/jme.2016.16587}
}
Kostenlos starten →