EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Design of Experiment (DOE) Analysis with Response Surface Method (RSM) to Optimize the Electroplating Parameter

Adi Permana, Humiras Hardi Purba, Sawarni Hasibuan

ComTech: Computer, Mathematics and Engineering Applications · 09.11.2021 · 12 (2) · 99-109

DOI: 10.21512/comtech.v12i2.6998 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ComTech: Computer, Mathematics and Engineering Applications, online erschienen am 09.11.2021. Verfasst von Adi Permana und 2 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Identifying optimum process parameters, their effects, and contributions to the outcomes of electroplating thickness in the electroplating process is very time-consuming and requires high cost. Small Medium Enterprises (SMEs) use a traditional approach in determining optimum process parameters that can lead to an inefficient result, such as a high variation in the response. Design of Experiment (DOE) can identify the significant factors in the process, show the correlation of each factor, and determine the optimum process parameter to achieve the targeted response (thickness). The research aimed to use DOE analysis with Response Surface Method (RSM) to optimize the electroplating parameter. It was experimental research using real production part as the DOE sample and Minitab statistic software to analyze the result. The used sample in the experiment was the continuous product order from a home appliance manufacturer. Then, four factors during the electroplating process were chosen: electrolyte concentration, electric current, duration of timing, and surface of the electroplated area. The results show that to reach thickness at 40 microns, it needs the optimum parameter with 5 minutes duration, electrolyte density of 22 Baume, electricity of 5 Volt, and surface area product of 415 cm2. This condition leads to capacity improvement of up to 100%. Hence, it decreases overtime costs and contributes to reducing energy consumption.

Zitieren

APA

Permana, A., Purba, H. H., & Hasibuan, S. (2021). Design of Experiment (DOE) Analysis with Response Surface Method (RSM) to Optimize the Electroplating Parameter. ComTech: Computer, Mathematics and Engineering Applications, 12(2), 99-109. https://doi.org/10.21512/comtech.v12i2.6998

Vancouver

Permana A, Purba HH, Hasibuan S. Design of Experiment (DOE) Analysis with Response Surface Method (RSM) to Optimize the Electroplating Parameter. ComTech: Computer, Mathematics and Engineering Applications. 2021;12(2):99-109. doi:10.21512/comtech.v12i2.6998

BibTeX
@article{Permana2021,
  author = {Permana, Adi and Purba, Humiras Hardi and Hasibuan, Sawarni},
  title = {Design of Experiment (DOE) Analysis with Response Surface Method (RSM) to Optimize the Electroplating Parameter},
  journal = {ComTech: Computer, Mathematics and Engineering Applications},
  year = {2021},
  volume = {12},
  number = {2},
  pages = {99--109},
  doi = {10.21512/comtech.v12i2.6998}
}
Kostenlos starten →