EUVIMEDEUVIMED entdecken
Crossref

Arsenic-rich Apatite as a Recorder of Crystallization Processes in Felsic Plutonic Systems

Bryan J. Maciag, James M. Brenan, Peteris Rozenbaks

American Mineralogist · 19.08.2026

DOI: 10.2138/am-2025-10122 ↗

Kurz gefasst

Fachartikel in der Zeitschrift American Mineralogist, online erschienen am 19.08.2026. Verfasst von Bryan J. Maciag und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Arsenic can concentrate in phosphate minerals, such as apatite, with levels exceeding whole-rock concentrations in some felsic igneous suites. This strong As-apatite association is ascribed to oxidizing conditions during crystallization, as arsenate [AsVO43-] is expected to be more compatible than arsenite [AsIIIO33-] in apatite. However, previous spectroscopic measurements on a basaltic melt composition indicates that AsIII is the dominant species over the range of terrestrial oxygen fugacity (fO2), thus total As partitioning (meaning the combined AsIII and AsV species) into apatite is expected to be minimal. To understand this apparent contradiction, apatite-melt partitioning experiments using metaluminous, peraluminous, and peralkaline felsic melt compositions were performed at fO2 ranging from ΔFMQ of −0.4 to +8.1 (ΔFMQ = log deviation from the Fayalite-Magnetite-Quartz redox buffer), 0.75 GPa, and 900–1050 °C. Arsenic speciation data obtained from quenched silicate glasses using X-ray absorption near edge structures spectroscopy (XANES) indicate that AsIII predominates at FMQ−0.4, but decreases in abundance with increasing fO2. At FMQ+8.1, the amount of AsV reaches ∼60–80% of the total arsenic concentration. At a given fO2, the proportion of AsV decreases in the compositional order: peralkaline, metaluminous and peraluminous, and that these felsic melts stabilize more AsV than previously reported for a basaltic composition. Results from the apatite/melt partitioning experiments indicate that Dapatite/melt increases from ∼0.1 at FMQ-0.4 to ∼20 at FMQ+8.1 consistent with the increased prevalence of AsV, and the preferred substitution of [AsVO43-] for [PVO43-] in the apatite structure. Speciation and partitioning results are combined to generate an apatite-melt partitioning model that incorporates fO2, temperature and melt composition. Results underscore the need for unusually oxidizing conditions (ΔFMQ+4.7) for the As concentration of apatite to exceed the levels in the co-existing melt. Application of the model to natural samples indicates that apatite-whole rock or -glass ratios of arsenic concentrations from plutonic and extrusive suites often exceed the model predictions. The higher ratios for extrusive suites could be attributed to relative arsenic depletion in the glass from volatile transfer during eruption. For peraluminous plutonic suites, in which apatite solubility is high, apatite concentrations exceeding the whole rock may result from protracted in situ crystallization of As-free phases prior to apatite saturation. For metaluminous plutonic suites, in which apatite crystallizes early, factors such as accumulation of arsenic-poor phases, or late arsenic loss are possible explanations of high apatite/whole-rock partitioning. High arsenic concentrations in apatite do not, alone, reflect oxidizing conditions during crystallization, but instead require accurate estimates of the melt concentration from which the apatite formed.

Zitieren

APA

Maciag, B. J., Brenan, J. M., & Rozenbaks, P. (2026). Arsenic-rich Apatite as a Recorder of Crystallization Processes in Felsic Plutonic Systems. American Mineralogist. https://doi.org/10.2138/am-2025-10122

Vancouver

Maciag BJ, Brenan JM, Rozenbaks P. Arsenic-rich Apatite as a Recorder of Crystallization Processes in Felsic Plutonic Systems. American Mineralogist. 2026. doi:10.2138/am-2025-10122

BibTeX
@article{Maciag2026,
  author = {Maciag, Bryan J. and Brenan, James M. and Rozenbaks, Peteris},
  title = {Arsenic-rich Apatite as a Recorder of Crystallization Processes in Felsic Plutonic Systems},
  journal = {American Mineralogist},
  year = {2026},
  doi = {10.2138/am-2025-10122}
}
Kostenlos starten →