EUVIMEDEUVIMED entdecken
Crossref

Quantitative analyses by combined energy- and wavelength-dispersive spectrometry: The best of both worlds

Julien M. Allaz, Lukas Martin, Julian-Christopher Storck, Peter Ulmer, Eric Reusser, Razvan-Gabriel Popa, Arka Chatterjee, Olivier Bachmann

American Mineralogist · 01.08.2026 · 111 (8) · 1231-1246

DOI: 10.2138/am-2025-10014 ↗

Kurz gefasst

Fachartikel in der Zeitschrift American Mineralogist, online erschienen am 01.08.2026. Verfasst von Julien M. Allaz und 7 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 57 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper focuses on the ability of electron probe microanalyzer (EPMA) or scanning electron microscope (SEM) to yield precise and accurate compositions using wavelength- and energy-dispersive spectrometers (WDS and EDS) for standards-based quantitative X-ray analysis. This approach can be extremely useful to improve analytical capabilities at the micrometer-scale, notably to: (1) reduce the total analysis time; (2) improve the precision and accuracy on minor and trace elements in beam sensitive materials; (3) improve the accuracy by choosing WDS analysis for elements suffering from a poor peak-to-background ratio and low count rate on EDS (e.g., trace elements, light elements) or of a strong interference by EDS; (4) permit the post-analysis quantification of an unsuspected element; (5) enable a lifeline to salvage quantitative data after a WDS hardware failure or a change in the environment affecting one or more WDS (i.e., room temperature); (6) yield a combination of the above, and possibly more. First, we evaluate the reliability of EDS vs. WDS data in geological samples on our EPMA and SEM instruments. A general silicate analysis setup is designed to prove that identical results can be obtained for major and minor elements down to ∼0.5 wt% in various common rock-forming minerals. In the second step, we compare the analysis of natural and synthetic glass by classical WDS-only EPMA analysis vs. EDS on an SEM, the latter being appreciated for both its standards-based and standardless options. Finally, two real-case applications of combined EDS-WDS analysis are presented: (1) halogens and a few minor to trace elements analysis in apatite (e.g., S, Ce, Si, Na, Fe, Mg, and Mn) at low current and high resolution (≤10 nA, 2 to 10 μm beam size) and Ca and P analyzed by EDS; and (2) trace analysis of P in olivine (and other elements such as Cr and Al) at high current (≥200 nA) and focused beam, with Si, Fe, Mg, and Mn by EDS.

Zitieren

APA

Allaz, J. M., Martin, L., Storck, J., Ulmer, P., Reusser, E., Popa, R., Chatterjee, A., & Bachmann, O. (2026). Quantitative analyses by combined energy- and wavelength-dispersive spectrometry: The best of both worlds. American Mineralogist, 111(8), 1231-1246. https://doi.org/10.2138/am-2025-10014

Vancouver

Allaz JM, Martin L, Storck J, Ulmer P, Reusser E, Popa R, et al. Quantitative analyses by combined energy- and wavelength-dispersive spectrometry: The best of both worlds. American Mineralogist. 2026;111(8):1231-1246. doi:10.2138/am-2025-10014

BibTeX
@article{Allaz2026,
  author = {Allaz, Julien M. and Martin, Lukas and Storck, Julian-Christopher and Ulmer, Peter and Reusser, Eric and Popa, Razvan-Gabriel and Chatterjee, Arka and Bachmann, Olivier},
  title = {Quantitative analyses by combined energy- and wavelength-dispersive spectrometry: The best of both worlds},
  journal = {American Mineralogist},
  year = {2026},
  volume = {111},
  number = {8},
  pages = {1231--1246},
  doi = {10.2138/am-2025-10014}
}
Kostenlos starten →