EUVIMEDEUVIMED entdecken
Crossref

Mechanical and Corrosion Protection Characteristics of CNTs/epoxy resin Nanocomposite Coating on Buried API 5L X65 Steel Storage Tank

Aliyu Shehu Buhari, Asipita Salawu Abdulrahman, Sunday Albert Lawal, Ambali Saka Abdulkareem, Rasheed Aremu Muriana, Jimoh Oladejo Tijani, Hassan Kobe Ibrahim, Yusuf Olanrewaju Busari

Journal of Physical Science · 28.04.2023 · 34 (1) · 87-108

DOI: 10.21315/jps2023.34.1.8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Physical Science, online erschienen am 28.04.2023. Verfasst von Aliyu Shehu Buhari und 7 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The storage of petroleum products in buried metal tanks to ensure safety is common practice. However, the integrity of these tanks could be compromised by soil corrosion with economic and environmental consequences. This study examines carbon nanotubes mechanical and anti-corrosive capabilities (CNTs) and epoxy resin coating on steel tanks. The presence of corrosive ions, resistivity, and pH values were all tested in the soil sample. CNT was mixed in proportions of 1.5, 2.5, 3.5 and 4.5 weight percent of epoxy resin to create the coatings. The morphology of uncoated steel, epoxy, and CNTs/ epoxy resin-coated steel specimens was studied using high-resolution scanning electron microscopy (HRSEM) equipment with energy dispersive x-ray spectroscopy (EDX). Electrochemical impedance spectroscopy (EIS) was used for corrosion analysis, and the morphological result was established. The average ions content soil samples showed 272 mg/kg chloride, 467.20 mg/kg sulphate and 167.40 Ω-m for the average resistivity value. The sample’s pH was acidic because it fell within 6.11–7.48. The tensile strength, hardness, and tensile modulus of epoxy resin with CNTs increase with CNTs. The addition of 3.5% CNTs has the best effect on the mechanical strength of the composite. The nanocomposite coatings exhibited considerably superior conductors, according to the EIS investigation. Thus, the hybrid of epoxy and CNTs increases the hydrophobicity of the coated surface.

Zitieren

APA

Buhari, A. S., Abdulrahman, A. S., Lawal, S. A., Abdulkareem, A. S., Muriana, R. A., Tijani, J. O., Ibrahim, H. K., & Busari, Y. O. (2023). Mechanical and Corrosion Protection Characteristics of CNTs/epoxy resin Nanocomposite Coating on Buried API 5L X65 Steel Storage Tank. Journal of Physical Science, 34(1), 87-108. https://doi.org/10.21315/jps2023.34.1.8

Vancouver

Buhari AS, Abdulrahman AS, Lawal SA, Abdulkareem AS, Muriana RA, Tijani JO, et al. Mechanical and Corrosion Protection Characteristics of CNTs/epoxy resin Nanocomposite Coating on Buried API 5L X65 Steel Storage Tank. Journal of Physical Science. 2023;34(1):87-108. doi:10.21315/jps2023.34.1.8

BibTeX
@article{Buhari2023,
  author = {Buhari, Aliyu Shehu and Abdulrahman, Asipita Salawu and Lawal, Sunday Albert and Abdulkareem, Ambali Saka and Muriana, Rasheed Aremu and Tijani, Jimoh Oladejo and Ibrahim, Hassan Kobe and Busari, Yusuf Olanrewaju},
  title = {Mechanical and Corrosion Protection Characteristics of CNTs/epoxy resin Nanocomposite Coating on Buried API 5L X65 Steel Storage Tank},
  journal = {Journal of Physical Science},
  year = {2023},
  volume = {34},
  number = {1},
  pages = {87--108},
  doi = {10.21315/jps2023.34.1.8}
}
Kostenlos starten →