Study of Friction Stir Spot Welding Process and its Parameters for Increasing Strength of Dissimilar Joints
Rev. Téc. Ing. Univ. Zulia. · 03.09.2016
DOI: 10.21311/001.39.1.17 ↗Kurz gefasst
Fachartikel in der Zeitschrift Rev. Téc. Ing. Univ. Zulia., online erschienen am 03.09.2016. Die Arbeit wurde bisher 1-mal zitiert (Crossref).
Abstract (Originalsprache)
-Joining of dissimilar materials poses a challenge due to the difference in physical properties (melting point, thermal coefficient of expansion and density), mechanical properties (strength, hardness and toughness) and metallurgical properties (crystal structure, microstructure and chemical composition). Solid state joining comes as a novel method for joining these. In this paper, friction stir spot welding, a new variant of friction stir welding process is discussed. As it is a solid state joining process, its importance in joining dissimilar materials is studied. The important friction stir spot welding parameters and their effect on the strength of the joined materials are analyzed. The defects that pose a challenge reducing the mechanical properties of the joints a r e critically examined and suitable methods for improvement of these properties are evaluated.
Zitieren
APA
(2016). Study of Friction Stir Spot Welding Process and its Parameters for Increasing Strength of Dissimilar Joints. Rev. Téc. Ing. Univ. Zulia.. https://doi.org/10.21311/001.39.1.17
Vancouver
Study of Friction Stir Spot Welding Process and its Parameters for Increasing Strength of Dissimilar Joints. Rev. Téc. Ing. Univ. Zulia.. 2016. doi:10.21311/001.39.1.17
BibTeX
@article{euvimed2016,
title = {Study of Friction Stir Spot Welding Process and its Parameters for Increasing Strength of Dissimilar Joints},
journal = {Rev. Téc. Ing. Univ. Zulia.},
year = {2016},
doi = {10.21311/001.39.1.17}
}
EUVIMED