EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Punching Shear Behaviour of Reinforced Concrete Flat Plate Slab using Recycled Concrete Aggregate

Zhavin Fakhralddin Mohammed, Omar Qarani Aziz

Zanco Journal of Pure and Applied Sciences · 30.06.2026 · 38 (3) · 186-202

DOI: 10.21271/zjpas.38.3.14 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Zanco Journal of Pure and Applied Sciences, online erschienen am 30.06.2026. Verfasst von Zhavin Fakhralddin Mohammed und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The substitution of natural aggregate with recycled concrete aggregate in concrete is currently being researched to address increasing environmental and sustainability concerns. Recycled concrete aggregate is sustainable for the environment and is used in concrete production. This research addresses the experimental evaluation of recycled concrete aggregate (RCA) as a substitute for natural aggregate (NA) in interior slab-column connections. Small-scale internal slab-column connections were subjected to a concentrated load applied through the column until failure happened. The primary test variables were slab thickness and concrete type and the slabs were designed to fail in shear. All slabs had identical dimensions and a reinforcement ratio of 1%. The article provides a thorough explanation of the experimental procedure, tests, and outcomes, together with an overview of all results. The punched shear capabilities have been determined from the test results and compared with the estimated values based on the ACI code equations. The evaluation of the slabs was conducted via a comparison of load capacity, failure modes, load-deflection, concrete strain, steel strain, and cracking patterns. The test findings indicated that the presence of RCA in RC slabs resulted in only a 5 percent reduction in ultimate capacity and an enhancement in deformability compared to normal concrete (NAC) slabs. The deflection of the RCA slab was minimized by increasing its thickness; hence, its capacity was improved.

Zitieren

APA

Mohammed, Z. F., & Aziz, O. Q. (2026). Punching Shear Behaviour of Reinforced Concrete Flat Plate Slab using Recycled Concrete Aggregate. Zanco Journal of Pure and Applied Sciences, 38(3), 186-202. https://doi.org/10.21271/zjpas.38.3.14

Vancouver

Mohammed ZF, Aziz OQ. Punching Shear Behaviour of Reinforced Concrete Flat Plate Slab using Recycled Concrete Aggregate. Zanco Journal of Pure and Applied Sciences. 2026;38(3):186-202. doi:10.21271/zjpas.38.3.14

BibTeX
@article{Mohammed2026,
  author = {Mohammed, Zhavin Fakhralddin and Aziz, Omar Qarani},
  title = {Punching Shear Behaviour of Reinforced Concrete Flat Plate Slab using Recycled Concrete Aggregate},
  journal = {Zanco Journal of Pure and Applied Sciences},
  year = {2026},
  volume = {38},
  number = {3},
  pages = {186--202},
  doi = {10.21271/zjpas.38.3.14}
}
Kostenlos starten →